How to Calculate Compressive Strength
Calculates the compressive strength of a material before failure under compression load.
The Formula
load / areaThe compressive strength formula uses the mathematical relationship: load / area. Each variable in the formula represents a measurable quantity that affects the final result.
What Each Variable Means
Every value in the compressive strength formula, what it measures, and the value used in the worked example on this page:
| Variable | Type | Example value |
|---|---|---|
| Failure Load (F, N) | Input (you provide) | 50,000 |
| Cross-sectional Area (A, mm²) | Input (you provide) | 250 |
| Compressive Strength (MPa) | Result (calculated) | — |
Step-by-Step Method
- 1Write down the values you know: Failure Load (F, N), Cross-sectional Area (A, mm²).
- 2Substitute your known values into the formula: load / area.
- 3Work through the arithmetic in the standard order of operations — parentheses first, then exponents, then multiplication and division, then addition and subtraction.
- 4Check that your result carries the correct unit and falls in a reasonable range for the problem.
- 5Verify your answer with the interactive Compressive Strength Calculator — it solves the same formula instantly.
Worked Example
Take a concrete case: failure load (f, n) = 30,000, with the other inputs at the typical values from the variables table above. Substituting into the formula gives compressive strength (mpa) = 120.00. These numbers are solved by the same engine that powers the Compressive Strength calculator, so you can reproduce them exactly by entering the same inputs there.
| Failure Load (F, N) | Compressive Strength (MPa) |
|---|---|
| 10,000 | 40.00 |
| 30,000 | 120.00 |
| 40,000 | 160.00 |
| 50,000 | 200.00 |
| 60,000 | 240.00 |
| 80,000 | 320.00 |
| 100,000 | 400.00 |
| 200,000 | 800.00 |
How each result changes as failure load (f, n) changes, holding the other inputs constant.
Practice Problems
1. Example calculation: Given Failure Load (F, N) 50,000, Cross-sectional Area (A, mm²) 250, what does it come out to?
Answer: Entering Failure Load (F, N) 50,000, Cross-sectional Area (A, mm²) 250 gives Compressive Strength (MPa) 200.00.
Frequently Asked Questions
What is the formula for compressive strength?
The formula is: load / area. Calculates the compressive strength of a material before failure under compression load.
What values do I need to calculate compressive strength?
You need failure load (f, n), cross-sectional area (a, mm²). The calculator produces compressive strength (mpa) from those inputs.
What is the compressive strength when failure load (f, n) is 30,000?
With failure load (f, n) = 30,000, the result is compressive strength (mpa) = 120.00. This is worked through in full in the example on this page.
Related Topics
Use the Interactive Calculator
Skip the manual math — get instant results with our free Compressive Strength calculator.
