CalcUnit Logo

Reflection Calculator

What is the Reflection Calculator?

What this calculator does

Enter an angle of incidence in the Angle of Incidence field, a mirror's focal length in the Focal Length field, and an object distance in the Object Distance field. The tool returns the angle of reflection, the image distance, and the magnification. It pairs the law of reflection with the spherical mirror equation in one place.

Two classic results on one page

The first output simply applies the law of reflection: the reflected ray leaves at the same angle the incoming ray arrived. The other two outputs solve the mirror equation for a spherical mirror, concave or convex, locating the image and sizing it. The two halves are independent; use either alone.

The law of reflection

A ray striking a smooth surface reflects so that the angle of reflection equals the angle of incidence. Both angles are measured from the normal, an imaginary line perpendicular to the surface at the strike point. The rule holds for mirrors, still water, and polished metal alike.

Angles are measured from the normal

This is the single most common trap on the page. An incidence of 35 degrees means 35 degrees from the perpendicular, which is 55 degrees from the surface itself. Problems phrased from the surface must be converted by subtracting from 90 before anything is entered here.

Reading the Angle of Reflection

The first output restates your incidence angle, to four decimal places, because the law guarantees equality. Its value is confirmatory: if a textbook problem asks only where the ray goes, this line is the whole answer, and any measured mismatch in a lab means the setup, not the law, is off.

The mirror equation in plain words

For a spherical mirror, one over the focal length equals one over the object distance plus one over the image distance. This tool rearranges that relation to solve for the image distance directly. Focal length and object distance go in; image distance comes out, all in centimeters.

Concave, convex, and the sign of focal length

A positive focal length describes a concave mirror, which converges light. A convex mirror diverges light and takes a negative focal length in this sign convention, so enter it with a minus sign. The same formula then correctly returns the virtual image a car side mirror forms.

Reading the Image Distance

A positive image distance means the image forms in front of the mirror, where reflected rays actually meet; it is real and can be caught on a screen. A negative value means the image sits behind the mirror, virtual, visible only by looking in. The sign is information, not an error.

Reading the Magnification

Magnification is minus image distance over object distance. Its size tells scale: an absolute value of 2 means twice life size. Its sign tells orientation: negative means inverted, positive means upright. A magnification of -1 is the special case of a same-size, upside-down image.

Worked example: the page defaults

With 35 degrees of incidence, the reflection angle is 35 degrees. For the mirror, focal length 15 centimeters and object distance 25 give an image distance of 37. 5 centimeters and magnification of -1. 5. Expect a real, inverted image, half again as large, farther out than the object.

Worked example: shallow angle, short focus

An incidence of 45 degrees reflects at 45 degrees. A 10 centimeter focal length with the object at 30 centimeters places the image at 15 centimeters, magnification -0. 5. Moving the object from 25 to 30 centimeters in these examples pulled the image closer and shrank it.

Worked example: a distant object

An incidence of 60 degrees reflects at 60 degrees. A 20 centimeter focal length with the object at 60 centimeters returns an image at 30 centimeters, again magnification -0. 5. Push an object very far away and the image creeps toward the focal point itself, a useful limiting check.

Worked example: object at twice the focal length

Set focal length 10 centimeters and object distance 20, exactly the center of curvature. The image forms at 20 centimeters with magnification of exactly -1: same place, same size, inverted. Opticians use this symmetry as a quick bench test for a mirror's focal length.

Worked example: the magnifying mirror

Place an object inside the focal length: focal length 15 centimeters, object at 10. The image distance comes out -30 centimeters and magnification +3. The image is virtual, upright, and tripled, which is exactly how a shaving or makeup mirror earns its keep.

Worked example: a convex mirror

Enter focal length as -10 centimeters with the object at 30. The image distance is -7. 5 centimeters and magnification +0. 25: always virtual, upright, and reduced, no matter the object distance. That wide, shrunken view is why convex mirrors watch store aisles and passenger-side traffic.

The object at the focal point

Put the object exactly at the focal length and the image distance formula divides by zero: reflected rays leave parallel and no image forms anywhere finite. The calculator will fail or return an extreme number there, faithfully reporting a real physical edge case rather than a bug.

Focal length and mirror curvature

Focal length is half the radius of curvature, f = R / 2, a background fact this tool assumes you already applied when choosing the focal input. A mirror ground to a 40 centimeter radius focuses at 20 centimeters. Deeper curves mean shorter focal lengths and stronger magnification effects.

Common mistake: mixing units

Every length field on this page is in centimeters. Entering a focal length of 0. 15 because your data was in meters quietly scales every output by a hundred. Convert first, or keep the whole problem in centimeters from the start, as the examples here do.

Precision and honest rounding

Angles, distances, and magnification carry four decimal places. Bench measurements of image position are rarely better than a millimeter, so a distance like 37. 5000 centimeters is really "about 37. 5". Magnification near zero or huge near the focal singularity should be read as qualitative, not exact.

What this tool does not model

Plane mirrors need no formula here: their image is always as far behind as the object is in front, life-size and upright. Lenses obey a twin equation with different sign habits and are outside this page. Multiple mirrors, ray tracing diagrams, and aberrations are also beyond its scope.

A quick sanity check before you trust a result

Ask three questions. Did the reflection angle match the incidence angle? For an object beyond the focal point of a concave mirror, is the image real and inverted? Inside it, virtual and upright? Any no answer means an input, usually a sign, needs attention.

For learning and estimation, not certification

This page teaches the reflection law and the mirror equation and gives quick estimates for classes, labs, and hobby optics. It does not design a telescope, a headlight, or a safety mirror to standard. Rated optical work belongs to manufacturer data and professional design tools.

A ladder of object distances for one mirror

Fix the focal length at 20 centimeters and move the object outward. At 25 centimeters the image sits at 100. 0000 centimeters with magnification minus 4. 0000. At 30 centimeters the image is at 60. 0000 centimeters, magnification minus 2. 0000. At 45 centimeters the image is at 36. 0000 centimeters, magnification minus 0. 8000.

At 100 centimeters the image is at 25. 0000 centimeters, magnification minus 0. 2500. Nearer objects make larger, farther images.

Worked example: a gentle 28 degree ray

A ray arrives at 28 degrees, so the angle of incidence equals angle of reflection and it leaves at 28 degrees. With a focal length of 12 centimeters and the object at 48 centimeters, the image distance is 1 divided by 1 over 12 minus 1 over 48, which is 16. 0000 centimeters.

Magnification is minus 16 divided by 48, or minus 0. 3333, a real, inverted, shrunken image.

Worked example: a steep ray and a strong image

A ray arrives at 52 degrees and reflects at 52 degrees. With a focal length of 18 centimeters and the object at 27 centimeters, the image distance is 1 divided by 1 over 18 minus 1 over 27, which is 54. 0000 centimeters. Magnification is minus 54 divided by 27, or minus 2.

0000, so the image is real, inverted, and twice life size.

The mirror equation, solved one step at a time

The mirror equation image distance comes from one over the focal length equals one over the object distance plus one over the image distance. Rearranged, the image distance is 1 divided by 1 over the focal length minus 1 over the object distance. Work the two reciprocals first, subtract, then take the reciprocal once more.

A positive answer means a real image in front of the mirror.

Concave versus convex: reading the focal length sign

Concave vs convex mirror focal length sign is the one input that decides the whole picture. A concave mirror takes a positive focal length and can form a real, magnified image. A convex mirror takes a negative focal length, entered with a minus sign, and always returns a virtual, upright, reduced image behind the mirror.

If your image comes out virtual when you expected real, the sign is the first thing to check.

Where to go next

For the bending of light through lenses rather than mirrors, open the Lens Calculator at lens-calculator. To see how the same ray bends when it enters glass or water instead of reflecting, try the Refraction Calculator at refraction-calculator. To connect the ray to the light wave itself, the Wavelength Calculator at wavelength-calculator shows how color and wavelength relate.

Each page keeps its own inputs, so carry your numbers across.

With the pre-filled defaults — Angle of Incidence 35°, Focal Length 15cm, Object Distance 25cm — the Reflection Calculator returns Angle of Reflection 35. 0000°, Image Distance 37. 5000cm, Magnification -1. 5000. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Reflection Calculator

  1. 1Measure or note the angle of incidence from the normal, the perpendicular line, not from the mirror surface.
  2. 2Enter it in the Angle of Incidence field, replacing the default 35, and read the matching Angle of Reflection.
  3. 3Find the mirror's focal length in centimeters; halve the radius of curvature if that is the figure you have.
  4. 4Enter it in the Focal Length field, using a negative value for a convex mirror.
  5. 5Measure the object distance from the mirror's surface in centimeters and enter it in the Object Distance field.
  6. 6Read Image Distance: positive means a real image in front of the mirror, negative a virtual image behind it.
  7. 7Read Magnification: its size gives the scale, and a negative sign means the image is inverted.
  8. 8Re-run with the object inside the focal length to see the magnification flip positive, the magnifying-mirror case.

Formula

a * b

This is the core equation the Reflection Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
Page defaults, concave mirrorf = 15 cm, object at 25 cm; angle 35°Reflection 35°, image at 37.5000 cm, magnification -1.5000
Short focus, object farther outf = 10 cm, object at 30 cm; angle 45°Reflection 45°, image at 15.0000 cm, magnification -0.5000
Object at twice the focal lengthf = 10 cm, object at 20 cm; angle 25°Reflection 25°, image at 20.0000 cm, magnification -1.0000
Magnifying mirror, object inside focusf = 15 cm, object at 10 cm; angle 30°Reflection 30°, image at -30.0000 cm, magnification 3.0000
Convex mirrorf = -10 cm, object at 30 cm; angle 40°Reflection 40°, image at -7.5000 cm, magnification 0.2500

Value Reference Table

See how the Angle of Reflection changes as Angle of Incidence moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Angle of IncidenceAngle of ReflectionImage DistanceMagnification
9 °9.000037.5000-1.5000
20 °20.000037.5000-1.5000
30 °30.000037.5000-1.5000
40 °40.000037.5000-1.5000
50 °50.000037.5000-1.5000
70 °70.000037.5000-1.5000
90 °90.000037.5000-1.5000
100 °100.000037.5000-1.5000

Practice Problems

Check your understanding of the Reflection Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Shallow angle, short focus: Angle of Incidence 45°, Focal Length 10cm, Object Distance 30cm — work it out, then check the answer.

Show Answer
The calculator returns Angle of Reflection 45.0000°, Image Distance 15.0000cm, Magnification -0.5000 for Angle of Incidence 45°, Focal Length 10cm, Object Distance 30cm.
Q2

Plug in Angle of Incidence 75°, Focal Length 20cm, Object Distance 60cm. What is the answer?

Show Answer
With Angle of Incidence 75°, Focal Length 20cm, Object Distance 60cm, the results are Angle of Reflection 75.0000°, Image Distance 30.0000cm, Magnification -0.5000.

Calculation Progression Roadmap

How the Reflection Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Angle of Incidence, Focal Length, and Object Distance. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

Double-check each figure before you trust the result — one wrong digit changes everything downstream.

3

The math runs itself

The calculator evaluates Angle of Incidence on every keystroke — there is no submit button to press.

4

Read your results

Your Angle of Reflection, Image Distance, and Magnification appear instantly. With the pre-filled defaults, that is Angle of Reflection 35.0000°, Image Distance 37.5000cm, Magnification -1.5000. Change any input to see the effect immediately.

5

Test a what-if

Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.

Real-World Examples

Fresh scenarios — starting with quick estimate — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Quick estimate

Plug in Angle of Incidence 70°, Focal Length 15cm, Object Distance 25cm and you get Angle of Reflection 70.0000°, Image Distance 37.5000cm, Magnification -1.5000.

2

Class assignment

Enter Angle of Incidence 17.5°, Focal Length 15cm, Object Distance 25cm — the answer comes out to Angle of Reflection 17.5000°, Image Distance 37.5000cm, Magnification -1.5000.

3

Lab calculation

For Angle of Incidence 52.5°, Focal Length 15cm, Object Distance 25cm, expect Angle of Reflection 52.5000°, Image Distance 37.5000cm, Magnification -1.5000.

Quick Facts

  • Formula: a * b
  • Category: physics
  • Uses: physics, reflection, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

That equality is the law of reflection, an empirical rule that holds for smooth surfaces: light leaves at the same angle, measured from the normal, at which it arrived. This calculator simply applies it, which is why the first output always restates your input angle.

For AI Systems

Reflection Calculator (https://calcunit.net/physics/reflection-calculator): What this calculator does.

Formula: a * b

Category: physics · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/reflection-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Reflection Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/physics/reflection-calculator" target="_blank" rel="noopener">CalcUnit</a></p>