CalcUnit Logo

Free Fall Calculator

What is the Free Fall Calculator?

What this calculator does.

Enter a fall time and a gravitational acceleration, and this page returns the distance fallen and the speed reached, using the two classic vacuum free-fall equations. It assumes the object starts from rest and that gravity is the only force acting on it the whole way down.

The velocity result is not terminal velocity.

The second output is labeled Terminal Velocity (v), but the formula behind it is simply v equals g times t: the speed at the instant you stop the clock. True terminal velocity is an aerodynamic limit set by air drag, and this page models no drag at all.

Dropped from rest is assumed.

There is no field for initial velocity, so every calculation describes an object released, not thrown. A ball thrown downward at 10 meters per second would travel farther and land faster than this page reports for the same time, and a thrown-upward object follows a different story entirely.

Gravity is an editable field.

The Gravitational Acceleration (g) field opens at 9. 80665 meters per second squared, the standard gravity value defined exactly and maintained by NIST. Because it is editable, the same page handles other worlds: enter 1. 62 for the Moon or 3. 71 for Mars and the fall slows dramatically.

Distance grows with the square of time.

Fall Distance (d) follows d equals one half g t squared, so the fall accelerates through space as well as speed. The first second covers about 4. 90 meters; the next second adds roughly 14. 71 more. Each new second of falling adds more distance than all intuition expects.

Velocity grows in a straight line.

Speed adds the same g every second: about 9. 81 meters per second, every second, with no ceiling inside this model. That linearity is exactly what real air removes. On paper a ten-second fall reaches 98. 0665 meters per second; real objects in air rarely get there.

Worked example one: three seconds on Earth.

Enter a Fall Time (t) of 3 with the default gravity of 9. 80665. The Fall Distance reads 44. 1299 meters, about 144. 78 feet, and the velocity reads 29. 4200 meters per second — roughly 65. 8 miles per hour, reached in the time a short elevator ride takes.

Worked example two: five seconds on Earth.

Enter 5 seconds at the default gravity

The distance grows to 122. 5831 meters, about 402. 18 feet — taller than a 30-story building — and the speed reaches 49. 0332 meters per second, near 109. 7 miles per hour. Notice the distance more than doubled when time grew by two thirds.

Worked example three: three seconds on the Moon.

Enter 3 seconds and set gravity to 1.62

The distance is just 7. 2900 meters and the speed 4. 8600 meters per second. With no lunar atmosphere, this vacuum model is nearly exact on the Moon, which is why Apollo 15's hammer and feather landed together in 1971.

Worked example four: four seconds on Mars.

Enter 4 seconds and set gravity to 3.71

The distance is 29. 6800 meters and the speed is 14. 8400 meters per second. Mars has a thin atmosphere, so the vacuum answer is a good first approximation for dense objects over short falls, though parachutes still rule real landings.

The first second surprises people.

At one second the fall covers only 4. 9033 meters, roughly a one-story drop, and reaches 9. 8066 meters per second. Falls feel gentle at first because the square law starts slowly. By three seconds the same object is doing highway speed, which is why short falls injure so effectively.

Air resistance in real falls.

Drag grows with the square of speed until it balances weight, and then acceleration stops at the true terminal velocity — about 53 meters per second for a belly-down skydiver. This page ignores that ceiling, so for falls longer than a few seconds in air, treat its answers as upper bounds.

Working backward from a known height.

The page solves forward only: time in, distance out

To find how long a drop from a known height takes, rearrange the formula yourself: time equals the square root of twice the height divided by g. A 44. 1299 meter drop gives the square root of 9, exactly 3 seconds.

The chart under the calculator.

A chart plots Fall Distance against Fall Time from 0. 1 to 10 seconds at Earth gravity. Its curve bends upward in the parabola the squared term predicts, ending near 490 meters at ten seconds — a vivid picture of why the square law, not the speed, dominates long falls.

What this calculator does not do.

It cannot accept a starting speed, a starting height, air density, object shape, or mass — in this model mass is irrelevant, which is correct only without air. It also cannot run backward from a height. For thrown objects or drag-aware estimates, you need a projectile or ballistics tool instead.

Doubling the time quadruples the distance.

Two seconds on Earth gives 19. 6133 meters, and four seconds gives 78. 4532 — exactly four times as far, as the squared term demands. Speed only doubles across the same stretch, from 19. 6133 to 39. 2266 meters per second. Distance, not speed, is what makes long falls so destructive so quickly.

The energy shortcut agrees.

Energy gives an independent check: speed after falling a distance d equals the square root of 2gd. For the three-second example, twice 9. 80665 times 44. 1299 meters gives a square root of 29. 4200 meters per second, matching the g-times-t result. Two different routes landing on one number is physics confirming itself.

On Jupiter the fall is brutal.

Jupiter's surface gravity is about 24.79 meters per second squared

Enter that with a 3 second fall and the distance becomes 111. 5550 meters at a speed of 74. 3700 meters per second. The same three seconds that feel modest on Earth cross an entire football field of distance there.

Classrooms measure g with this math.

Drop a steel ball past photogates, time the fall, and this formula turns the measurement into a value for g. Generations of physics students have done exactly that since Galileo's inclined-plane experiments first tamed falling motion. Their results cluster near 9. 8, held back mainly by timing and release errors, not the formula.

Why the chart bends but speed would not.

Plot speed against time and you get a straight ramp, because v equals g times t. Plot distance and the curve steepens relentlessly, because each second the faster object covers more ground. The calculator's chart shows the distance curve; imagine the speed ramp underneath it, rising at a constant, patient slope.

Small falls add up in safety math.

One second of falling already means an impact at 9. 8066 meters per second, about 35. 3 kilometers per hour — car-crash speed territory from a fall that began at rest barely a story up. Safety standards for ladders, scaffolds, and playgrounds are written around exactly this unforgiving arithmetic.

Units on this page.

Time is in seconds, gravity in meters per second squared, distance in meters, and speed in meters per second. For US intuition, multiply meters by 3. 28084 to get feet and meters per second by 2. 23694 to get miles per hour, as the worked examples above do.

Worked example five: six seconds on Earth

Enter a Fall Time of 6 with the default gravity of 9. 80665. The Fall Distance reads 176. 5197 meters, about 579. 13 feet, and the velocity reads 58. 8399 meters per second, roughly 131. 62 miles per hour.

Six seconds is about the time a dropped wrench spends falling from a tall construction crane, and the speed at the bottom is faster than most highway traffic. The distance also shows the square law at full strength: one extra second past five seconds adds more than 53 meters, while the first second added under 5.

Worked example six: two seconds on the Moon

Enter 2 seconds and set gravity to 1. 62. The distance is 3. 24 meters and the speed is 3. 24 meters per second, a neat coincidence of the numbers that makes it easy to remember. In feet that is a drop of about 10. 63 feet ending at roughly 7.

25 miles per hour, about the speed of a brisk jog. An astronaut who misjudged a two-second hop on the Moon would land gently enough to laugh about it, where the same fall on Earth would already be a 19. 6133 meter drop at highway speed.

A ladder of falls on Mars

Keep gravity at 3. 71 and step the time upward. After 1 second the fall covers 1. 855 meters at 3. 71 meters per second. After 2 seconds it is 7. 42 meters at 7. 42 meters per second. After 3 seconds it reaches 16. 695 meters at 11. 13 meters per second. After 5 seconds the distance is 46.

375 meters at 18. 55 meters per second, and after 6 seconds it is 66. 78 meters at 22. 26 meters per second. The ladder shows the same square-law shape as on Earth, only stretched out: Mars gives you more time to react, and every second still adds more distance than the one before it.

Gravity is not quite the same everywhere on Earth

The default value of 9. 80665 is a standard, not a local measurement. Real surface gravity runs roughly 9. 78 meters per second squared near the equator and about 9. 83 near the poles, because Earth bulges at the equator and spins.

Elevation trims it further: a mountaintop station can read a few tenths of a percent lower than the same latitude at sea level. For a classroom drop the difference is invisible, but a surveyor timing a long fall with precise instruments would enter the local value rather than the standard one.

Where to go next

The Velocity Calculator turns a fall time into speed for any steady acceleration, not just gravity. The Acceleration Calculator works the same relationship backward when you know the starting and ending speeds. The Kinetic Energy Calculator shows what a falling object carries at impact, which is the number that matters for damage.

The Potential Energy Calculator gives the energy stored at the starting height, the other half of the same story.

With the pre-filled defaults — Fall Time (t) 3 s, Gravitational Acceleration (g) 9. 80665 m/s² — the Free Fall Calculator returns Fall Distance (d) 44. 1299 m, Terminal Velocity (v) 29. 4200 m/s. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Free Fall Calculator

  1. 1Enter the duration of the fall in the Fall Time (t) field, in seconds; the page default is 3.
  2. 2Check the Gravitational Acceleration (g) field: leave it at 9.80665 for Earth, or enter 1.62 for the Moon or 3.71 for Mars.
  3. 3Remember the model before trusting the output: the object starts from rest, and no air resistance acts on it at any point.
  4. 4Read the Fall Distance (d) result in meters — this is how far the object drops during the time you entered.
  5. 5Read the Terminal Velocity (v) result as the speed at that instant, in meters per second — not as an aerodynamic terminal velocity.
  6. 6Convert for intuition if needed: meters times 3.28084 gives feet, and meters per second times 2.23694 gives miles per hour.
  7. 7Study the Fall Distance vs Time chart to see the squared growth: doubling the time quadruples the distance.
  8. 8For a drop from a known height instead, work backward by hand with time equals the square root of twice the height divided by g.

Formula

d = ½gt²

This is the core equation the Free Fall Calculator uses to calculate results. Enter values in the calculator above to see it in action.

See the full step-by-step formula guide with worked examples →

Common Examples

ScenarioCalculationResult
Three seconds on Earth (page defaults)d = 0.5 x 9.80665 x 3^2; v = 9.80665 x 344.1299 m and 29.4200 m/s
Five seconds on Earthd = 0.5 x 9.80665 x 5^2; v = 9.80665 x 5122.5831 m and 49.0332 m/s
Three seconds on the Moond = 0.5 x 1.62 x 3^2; v = 1.62 x 37.2900 m and 4.8600 m/s
Four seconds on Marsd = 0.5 x 3.71 x 4^2; v = 3.71 x 429.6800 m and 14.8400 m/s

Value Reference Table

See how the Fall Distance (d) changes as Fall Time (t) moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Fall Time (t)Fall Distance (d)Terminal Velocity (v)
0.8 s3.13817.8453
2 s19.613319.6133
3 s44.129929.4200
4 s78.453239.2266
5 s122.583149.0332
6 s176.519758.8399
8 s313.812878.4532
9 s397.169388.2599
10 s490.332598.0665

Practice Problems

Check your understanding of the Free Fall Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

3 seconds on Earth: Plug in Fall Time (t) 3 s, Gravitational Acceleration (g) 9.80665 m/s². What is the answer?

Show Answer
Entering Fall Time (t) 3 s, Gravitational Acceleration (g) 9.80665 m/s² gives Fall Distance (d) 44.1299 m, Terminal Velocity (v) 29.4200 m/s.
Q2

Given Fall Time (t) 3.75 s, Gravitational Acceleration (g) 1.62 m/s², what does it come out to?

Show Answer
The calculator returns Fall Distance (d) 11.3906 m, Terminal Velocity (v) 6.0750 m/s for Fall Time (t) 3.75 s, Gravitational Acceleration (g) 1.62 m/s².

Calculation Progression Roadmap

How the Free Fall Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Fall Time (t) and Gravitational Acceleration (g). The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.

3

The math runs itself

The calculator evaluates 0.5 × Gravitational Acceleration (g) × Fall Time (t)^2 on every keystroke — there is no submit button to press.

4

Read your results

Your Fall Distance (d) and Terminal Velocity (v) appear instantly. With the pre-filled defaults, that is Fall Distance (d) 44.1299 m, Terminal Velocity (v) 29.4200 m/s. Change any input to see the effect immediately.

5

Test a what-if

Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.

Real-World Examples

Fresh scenarios — starting with class assignment — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Class assignment

Enter Fall Time (t) 6 s, Gravitational Acceleration (g) 9.80665 m/s² — the answer comes out to Fall Distance (d) 176.5197 m, Terminal Velocity (v) 58.8399 m/s.

2

Lab calculation

For Fall Time (t) 1.5 s, Gravitational Acceleration (g) 9.80665 m/s², expect Fall Distance (d) 11.0325 m, Terminal Velocity (v) 14.7100 m/s.

3

Homework problem

A quick run with Fall Time (t) 4.5 s, Gravitational Acceleration (g) 9.80665 m/s² gives Fall Distance (d) 99.2923 m, Terminal Velocity (v) 44.1299 m/s.

Quick Facts

  • Formula: d = ½gt²
  • Category: physics
  • Uses: free fall, gravity, drop, physics
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

No, despite the output's label. It computes v equals g times t, the speed reached after t seconds of unopposed falling. True terminal velocity appears only when air drag balances weight — around 53 meters per second for a belly-down skydiver — and this model contains no drag, so its speeds keep growing without limit.

For AI Systems

Free Fall Calculator (https://calcunit.net/physics/free-fall-calculator): What this calculator does.

Formula: d = ½gt²

Category: physics · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/free-fall-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Free Fall Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/physics/free-fall-calculator" target="_blank" rel="noopener">CalcUnit</a></p>