Doppler Effect Calculator
What is the Doppler Effect Calculator?
What this calculator does.
Enter a Source Frequency (f), a Wave Speed (v), an Observer Speed (vo), and a Source Speed (vs), and this page returns three observed frequencies at once: one for a moving observer, one for a moving source, and one for both moving. Every case on this page is motion toward each other.
The honest scope: toward motion only.
All three formulas assume approach
The observer line adds the observer's speed, the source line subtracts the source's speed, and there is no result line for motion apart. For a receding source or observer, the pitch drops below the source frequency instead, by formulas this page does not evaluate.
The honest scope: sound, not light.
These are the classical Doppler formulas, derived for waves in a medium such as sound in air or water. Light and radio waves obey a relativistic version with a different formula. Entering the speed of light as the wave speed here would not make the answers correct for light, radar guns, or redshift.
The four inputs and their roles.
The Source Frequency (f) is the pitch the source actually emits
The Wave Speed (v) is how fast the wave travels through its medium, 343 meters per second for sound in air near 20 degrees Celsius. The two speed fields are magnitudes: how fast each party moves, with the direction handled by the formulas.
Reading the observer-moving line.
The Observed: Observer Moving Toward line multiplies the source frequency by the quantity wave speed plus observer speed, divided by wave speed. Moving toward the source, you meet each wave crest sooner, so the pitch rises in proportion to your closing speed. Standing still returns the source frequency unchanged.
Reading the source-moving line.
The Observed: Source Moving Toward line multiplies the source frequency by wave speed divided by the quantity wave speed minus source speed. A moving source chases its own wave crests, squeezing the wavelength ahead of it. Because the source's speed sits in a denominator, this effect grows faster than the observer's does.
Reading the both-moving line.
The Observed: Both Moving Toward line combines the two: source frequency times wave speed plus observer speed, divided by wave speed minus source speed. Approach from both sides stacks both effects. When either speed is zero, this line collapses exactly onto the corresponding single-motion line, a useful check on your entries.
Why the moving source wins the race.
At equal speeds, a moving source shifts pitch more than a moving observer. In the default example, the observer's 10 meters per second raises 440 hertz to 452. 83, while the source's 20 meters per second reaches 467. 24. Wavelength compression beats crest-meeting because the source speed erodes a denominator instead of padding a numerator.
Worked example one: the page defaults.
The calculator loads with a source frequency of 440 hertz, a wave speed of 343, an observer speed of 10, and a source speed of 20. The three lines read 452. 83 hertz for the observer moving, 467. 24 for the source moving, and 480. 87 for both moving toward each other.
Worked example two: the ambulance.
Enter a source frequency of 800 hertz, a wave speed of 343, an observer speed of 0, and a source speed of 25. The observer line returns 800. 00, since a stationary observer with this pairing isolates the source effect. The source and both-moving lines agree at 862. 89 hertz, the wail you hear as it approaches.
Worked example three: train horn and cyclist.
Enter a source frequency of 660 hertz, a wave speed of 343, an observer speed of 15, and source speed 30. The lines read 688. 86 hertz for the cyclist, 723. 26 for the train alone, and 754. 89 for both closing. A cyclist closing on a train hears a sharper horn than a bystander does.
Worked example four: sonar in water.
Sound travels faster in water, so enter a wave speed of 1,500
With a source frequency of 1,000 hertz, an observer speed of 5, and a source speed of 10, the lines read 1003. 33, 1006. 71, and 1010. 07 hertz. The shifts are smaller because the same speeds are a tinier fraction of the wave speed.
Choosing the wave speed.
The Wave Speed (v) field is an input, not a constant, because the medium is your choice. Use 343 meters per second for air near 20 degrees Celsius, about 1,480 for fresh water, about 1,500 for seawater, and several thousand for sound through a steel rail, which is why train listeners hear the rail sing early.
Sign conventions on this page.
Enter both speeds as positive numbers
The formulas themselves encode toward motion, so there is no minus sign to manage and no direction menu. A negative entry would be treated as slower-than-still approach in the arithmetic, producing numbers that answer a question nobody asked. Keep speeds positive and below the wave speed.
The wall at wave speed.
In the source formulas, the denominator is wave speed minus source speed
As the source speed approaches the wave speed, the predicted frequency rockets toward infinity, and at or beyond it the arithmetic breaks. Nature breaks first: a source near the speed of sound piles its waves into a shock instead, the sonic boom regime.
What happens after the source passes.
The instant a source passes you, the relevant geometry flips to receding motion and the pitch drops below the emitted frequency. That falling pitch, the second half of every passing siren you have heard, needs the away formulas with plus and minus swapped. This page deliberately covers only the approach half of the encounter.
Doppler in medicine and weather.
Doppler ultrasound estimates blood flow speed from the shift in echoes returning from moving cells, and weather radar reads storm motion the same way. Those instruments use their own specialized processing and, for radar, electromagnetic waves, but the approach-raises-pitch principle quantified on this page is the one they are built on.
Common mistake: speeds in miles per hour.
Every speed on this page is in meters per second, including the wave speed. A car at 30 miles per hour moves at 13. 41 meters per second, because one mile per hour equals 0. 44704 meters per second. Entering 30 raw overstates the car's speed more than twofold and inflates every shift with it.
Common mistake: expecting the two single lines to match.
Students often expect observer motion and source motion at the same speed to give the same frequency. They do not, and the difference is real physics, not a rounding error: moving through a medium and moving the wave's source are different situations for mechanical waves, so this page reports them separately.
Precision and the stationary check.
Results show two decimal places, plenty against shifts that run to tens of hertz. For a built-in check, set both speeds to zero: all three lines must return the source frequency exactly. If they do not, a field holds something other than what you intended, most often the wave speed.
Worked example: a police siren on a city street.
A police siren sounds at 520 hertz while the car approaches a standing listener at 28 meters per second. Enter f = 520, v = 343, vo = 0, vs = 28 and the page returns 520. 00 hertz for the observer moving, 566. 22 hertz for the source moving, and 566. 22 hertz for both moving.
The shift is 46. 22 hertz above the emitted pitch, a rise you would clearly hear as the car closes in.
The two moving lines agree here because the observer is standing still
With vo at zero, the both-moving formula collapses onto the source-moving formula, exactly as the existing description explains. Zeroing one speed is the fastest way to isolate the other effect.
Worked example: a cyclist riding toward a chiming van.
An ice cream van plays a chime at 880 hertz while driving toward a cyclist at 12 meters per second, and the cyclist rides toward the van at 8 meters per second. Enter f = 880, v = 343, vo = 8, vs = 12 and the lines read 900. 52 hertz for the observer moving, 911.
90 hertz for the source moving, and 933. 17 hertz for both moving. The shifts above the emitted note are 20. 52, 31. 90, and 53. 17 hertz.
Once again the moving source wins
At these speeds the source alone lifts the pitch by 31. 90 hertz while the observer alone lifts it by only 20. 52 hertz, even though the two speeds differ by just 4 meters per second. The denominator does the extra work, and the gap between the two effects widens as the source speeds up.
A short ladder: one horn, faster and faster.
Take a horn sounding at 600 hertz in still air and let the source speed climb. At 0 meters per second the heard pitch is 600. 00 hertz, with no shift at all. At 8 it is 614. 33, at 16 it is 629. 36, at 24 it is 645. 14, and at 32 it is 661. 74 hertz.
Each step adds a little more than the last: 14. 33, then 15. 03, then 15. 78, then 16. 60 hertz.
That quickening is the denominator shrinking
As the source speed approaches the wave speed of 343 meters per second, each extra meter per second buys a bigger jump in pitch. The same ladder in water, where sound travels roughly four times faster than in air, would barely move at all, which is why the sonar example in the existing description shows such small shifts.
Why warmer air sounds sharper.
The speed of sound in air is not fixed
Standard textbook values put it near 331 meters per second at 0 degrees Celsius, about 343 at 20 degrees, and about 349 at 30 degrees. A siren heard on a hot afternoon therefore shifts a touch more than the same siren on a cold morning, because the wave speed in the formula changes with the weather.
Enter the wave speed that matches your conditions.
Where to go next.
For the wavelength behind the pitch, the Wavelength Calculator converts frequency and wave speed into meters. The Sound Calculator explores sound levels and travel, the Velocity Calculator handles the speed conversions this page needs, and the Speed Distance Time Calculator turns any of these speeds into travel times over real distances.
With the pre-filled defaults — Source Frequency (f) 440 Hz, Wave Speed (v) 343 m/s, Observer Speed (vo) 10 m/s, Source Speed (vs) 20 m/s — the Doppler Effect Calculator returns Observed: Observer Moving Toward 452. 83 Hz, Observed: Source Moving Toward 467. 24 Hz, Observed: Both Moving Toward 480. 87 Hz.
Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Doppler Effect Calculator
- 1Enter the emitted pitch in the Source Frequency (f) field, in hertz.
- 2Enter the medium's wave speed in the Wave Speed (v) field: 343 for sound in air near 20 degrees Celsius.
- 3Enter how fast the observer moves toward the source in the Observer Speed (vo) field, in meters per second.
- 4Enter how fast the source moves toward the observer in the Source Speed (vs) field, in meters per second.
- 5Read the Observed: Observer Moving Toward line to isolate the observer's contribution to the shift.
- 6Read the Observed: Source Moving Toward line to isolate the source's contribution, which is the stronger of the two.
- 7Read the Observed: Both Moving Toward line for the combined approach frequency.
- 8Check your entries by setting both speeds to zero and confirming all three lines return the source frequency.
Formula
This is the core equation the Doppler Effect Calculator uses to calculate results. Enter values in the calculator above to see it in action.
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| Page defaults: concert A, both closing | 440 x 353 / 343; 440 x 343 / 323; 440 x 353 / 323 | 452.83 Hz; 467.24 Hz; 480.87 Hz |
| Ambulance approaching a standing listener | 800 x 343 / (343 - 25) | 800.00 Hz; 862.89 Hz; 862.89 Hz |
| Train horn with a cyclist approaching | 660 x 358 / 343; 660 x 343 / 313; 660 x 358 / 313 | 688.86 Hz; 723.26 Hz; 754.89 Hz |
| Sonar ping in seawater | 1000 x 1505 / 1500; 1000 x 1500 / 1490; 1000 x 1505 / 1490 | 1003.33 Hz; 1006.71 Hz; 1010.07 Hz |
Value Reference Table
See how the Observed: Observer Moving Toward changes as Source Frequency (f) moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| Source Frequency (f) | Observed: Observer Moving Toward | Observed: Source Moving Toward | Observed: Both Moving Toward |
|---|---|---|---|
| 100 Hz | 102.92 | 106.19 | 109.29 |
| 200 Hz | 205.83 | 212.38 | 218.58 |
| 300 Hz | 308.75 | 318.58 | 327.86 |
| 400 Hz | 411.66 | 424.77 | 437.15 |
| 600 Hz | 617.49 | 637.15 | 655.73 |
| 700 Hz | 720.41 | 743.34 | 765.02 |
| 900 Hz | 926.24 | 955.73 | 983.59 |
| 1,000 Hz | 1029.15 | 1061.92 | 1092.88 |
| 2,000 Hz | 2058.31 | 2123.84 | 2185.76 |
Practice Problems
Check your understanding of the Doppler Effect Calculator with these practice problems. Click a problem to reveal its correct calculated answer.
Ambulance siren, observer still walking: Source Frequency (f) 1,000 Hz, Wave Speed (v) 343 m/s, Observer Speed (vo) 15 m/s, Source Speed (vs) 0 m/s — work it out, then check the answer.
Show AnswerHide Answer
Plug in Source Frequency (f) 625 Hz, Wave Speed (v) 343 m/s, Observer Speed (vo) 0 m/s, Source Speed (vs) 30 m/s. What is the answer?
Show AnswerHide Answer
Calculation Progression Roadmap
How the Doppler Effect Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your Source Frequency (f), Wave Speed (v), Observer Speed (vo), and Source Speed (vs). The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
Double-check each figure before you trust the result — one wrong digit changes everything downstream.
The math runs itself
The calculator evaluates Source Frequency (f) × (Wave Speed (v) + Observer Speed (vo)) ÷ Wave Speed (v) on every keystroke — there is no submit button to press.
Read your results
Your Observed: Observer Moving Toward, Observed: Source Moving Toward, and Observed: Both Moving Toward appear instantly. With the pre-filled defaults, that is Observed: Observer Moving Toward 452.83 Hz, Observed: Source Moving Toward 467.24 Hz, Observed: Both Moving Toward 480.87 Hz. Change any input to see the effect immediately.
Test a what-if
Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.
Real-World Examples
Fresh scenarios — starting with quick estimate — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Quick estimate
Plug in Source Frequency (f) 880 Hz, Wave Speed (v) 343 m/s, Observer Speed (vo) 10 m/s, Source Speed (vs) 20 m/s and you get Observed: Observer Moving Toward 905.66 Hz, Observed: Source Moving Toward 934.49 Hz, Observed: Both Moving Toward 961.73 Hz.
Class assignment
Enter Source Frequency (f) 220 Hz, Wave Speed (v) 343 m/s, Observer Speed (vo) 10 m/s, Source Speed (vs) 20 m/s — the answer comes out to Observed: Observer Moving Toward 226.41 Hz, Observed: Source Moving Toward 233.62 Hz, Observed: Both Moving Toward 240.43 Hz.
Lab calculation
For Source Frequency (f) 660 Hz, Wave Speed (v) 343 m/s, Observer Speed (vo) 10 m/s, Source Speed (vs) 20 m/s, expect Observed: Observer Moving Toward 679.24 Hz, Observed: Source Moving Toward 700.87 Hz, Observed: Both Moving Toward 721.30 Hz.
Quick Facts
- Formula:
a * b - Category: physics
- Uses: physics, doppler effect, math
- Price: Free — no account needed
Frequently Asked Questions
Because the mechanisms differ. A moving observer simply meets crests sooner, raising frequency in direct proportion to speed. A moving source compresses the wavelength itself, and its speed sits in a denominator, wave speed minus source speed, so the effect accelerates as speed grows. This page's defaults show it: 452. 83 hertz against 467. 24.
For AI Systems
Doppler Effect Calculator (https://calcunit.net/physics/doppler-effect-calculator): What this calculator does.
Formula: a * b
Category: physics · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/doppler-effect-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Doppler Effect Calculator — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/physics/doppler-effect-calculator" target="_blank" rel="noopener">CalcUnit</a></p>
