CalcUnit Logo

Bernoulli Calculator

What is the Bernoulli Calculator?

What this calculator does

Enter the Pressure at Point 1 (P₁), Velocity at Point 1 (v₁), and Height at Point 1 (h₁) at one spot, plus the Velocity at Point 2 (v₂), Height at Point 2 (h₂), and Fluid Density (ρ) at a second. It returns the Pressure at Point 2 (P₂) and the Dynamic Pressure at Point 1.

The full equation, including height

Unlike some simplified tools, this calculator keeps all three energy terms: pressure, kinetic, and elevation. It sets P₁ + ½ρv₁² + ρgh₁ equal to the same sum at point 2 and solves for the unknown pressure, using g = 9. 81 meters per second squared. Height differences therefore matter here, exactly as they should.

The idea: energy trades between three forms

Along a streamline, a fluid parcel carries energy as pressure, as motion, and as height. Bernoulli's principle says the total stays constant in ideal flow, so when one form grows another must shrink. Faster flow spends pressure; rising flow spends pressure too. That trade is the entire content of the equation.

Worked example: the page default

Water at 101,325 pascals moves at 2 meters per second at the reference level, then speeds to 5 meters per second while rising 1 meter. The velocity term removes 10,500 pascals and the climb removes 9,810, leaving a Pressure at Point 2 (P₂) of 81,015 pascals. Dynamic Pressure at Point 1 is 2,000 pascals.

Worked example: a pipe at one level

Water entering at 200,000 pascals and 1. 5 meters per second, both points 2 meters above the reference so the height terms cancel. Speeding up to 3 meters per second costs 0. 5 × 1000 × (9 − 2. 25) = 3,375 pascals, giving P₂ = 196,625 pascals and a dynamic pressure of 1,125 pascals.

Worked example: air rising five meters

Air at sea-level density, 1. 225 kilograms per cubic meter, flows at 10 meters per second at both points but climbs 5 meters. With no velocity change, only the height term acts: 1. 225 × 9. 81 × 5 = 60. 0863 pascals lost, so P₂ = 101,264. 9138 pascals. Air's low density makes elevation cheap.

Worked example: a venturi narrowing

Water at 300,000 pascals enters a constriction at 1 meter per second and leaves at 4 meters per second, all at one height. The pressure falls by 0. 5 × 1000 × (16 − 1) = 7,500 pascals to 292,500 pascals. This deliberate pressure dip is how venturi meters measure flow rate in industrial piping.

Why the flow speeds up in a narrowing

This calculator takes the velocity as given, but in a pipe the continuity equation sets it: what flows in must flow out, so squeezing the area by a factor of four multiplies the velocity by four. Pair this page with the area ratio when a problem gives diameters instead of speeds.

Dynamic pressure, the second output

The Dynamic Pressure at Point 1 field reports ½ρv₁², the pressure rise you would measure by stopping the flow head-on. For water at 10 meters per second it reaches 50,000 pascals, half an atmosphere's worth of push. Pitot tubes on aircraft turn exactly this quantity into an airspeed reading.

The elevation term, in water terms

Every meter a water flow climbs costs ρgh = 9,810 pascals, and every meter it descends gains the same. Ten meters of head equals 98,100 pascals, about 0. 968 atmospheres, which is why municipal water towers sit high and why a third-floor shower fed from a basement tank feels weak.

The four assumptions you are making

Bernoulli's equation assumes steady flow, incompressible fluid, negligible friction, and points compared along one streamline. Water in short, wide pipes honors these well. Honey, long thin tubing, and violent turbulence break them badly. The calculator cannot warn you; judging whether your flow qualifies is the user's half of the bargain.

No friction, no head loss

Real pipes rob pressure through wall friction, bends, valves, and fittings, losses engineers tally with the Darcy-Weisbach equation. This calculator includes none of them, so its P₂ is the best case: a real system at the same speeds ends lower. Treat the gap between this answer and a gauge reading as the friction bill.

Gauge or absolute, pick one and stay there

The equation only rearranges differences, so you may enter gauge pressures throughout or absolute pressures throughout and get the matching P₂. Mixing the two corrupts everything by one atmosphere, 101,325 pascals. The default Pressure at Point 1 (P₁) of 101,325 is absolute sea-level pressure; a gauge-based problem should start from zero instead.

Choosing a sensible density

The Fluid Density (ρ) default of 1,000 kilograms per cubic meter is fresh water near 4 degrees Celsius. Seawater runs about 1,025, gasoline near 750, and air at sea level about 1. 225, falling with altitude and heat. Because every dynamic and elevation term scales with density, a wrong ρ quietly scales your whole answer.

What this tool cannot solve for

The unknown is hard-wired: this page finds pressure at point 2, and only that. It cannot return the velocity needed to reach a target pressure, nor the height a pump must lift water, though both come from the same equation rearranged. For those, solve the algebra by hand and use this page to check.

Negative answers and what they mean

Enter an aggressive speed-up or climb and P₂ can come out negative. For a gas that signals an impossible flow; for a liquid it warns that the pressure would fall below vapor pressure and the flow would cavitate, boiling locally and battering pump impellers. Nature refuses the number even when the equation offers it.

Where the 9.81 comes from

The height term uses a fixed g of 9. 81 meters per second squared, a hair under the NIST standard of 9. 80665. Over a 10 meter climb the difference amounts to about 34 pascals in water, invisible in homework and most plumbing. Only precision hydraulics work would ever notice the shortcut.

Airflow and the compressibility limit

Bernoulli's simple form treats density as constant, which air violates once speeds approach a sizable fraction of the speed of sound. Below about 0. 3 Mach, roughly 100 meters per second at sea level, density swings stay under five percent and this calculator remains serviceable. Ventilation and wind problems live comfortably inside that range.

A ten-second check of any answer

Recompute the constant sum at both points by hand: pressure plus dynamic pressure plus ρgh should match before and after. If the two totals differ, a field was swapped or a height was measured from a different reference. Both heights must share one datum, the single most common source of wrong homework answers.

Bernoulli in the wild

The principle explains why shower curtains drift inward, why race cars use wings that push down instead of lifting, and how carburetors and spray bottles sip fluid upward. Daniel Bernoulli published the relationship in his 1738 Hydrodynamica, long before the pipes and aircraft that made it famous existed to be analyzed.

Pumps and turbines break the rule

A pump between your two points injects energy, and a turbine extracts it, so the constant-sum rule fails across the machine. Apply this calculator to pipe runs on one side of the pump at a time. The extended Bernoulli equation, with a head term for the machine, is the professional tool for crossing it.

Decimals the display shows

Both outputs print to four decimal places, useful for air problems where the whole pressure change may be a few dozen pascals, as in the rising-air example. For water at engineering scales the decimals are decoration. Either way, report answers to the precision your input data honestly supports, not the precision the screen offers.

With the pre-filled defaults — Pressure at Point 1 (P₁) 101,325 Pa, Velocity at Point 1 (v₁) 2 m/s, Height at Point 1 (h₁) 0 m, and 3 more more inputs — the Bernoulli Calculator returns Pressure at Point 2 (P₂) 81,015. 0000 Pa, Dynamic Pressure at Point 1 2,000. 0000 Pa.

Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Bernoulli Calculator

  1. 1Enter the known pressure in the Pressure at Point 1 (P₁) field, in pascals; use 101325 for one standard atmosphere.
  2. 2Enter the flow speed in the Velocity at Point 1 (v₁) field, in meters per second.
  3. 3Enter the elevation in the Height at Point 1 (h₁) field, in meters above any reference level you choose.
  4. 4Enter the second flow speed in the Velocity at Point 2 (v₂) field, from measurement or the continuity equation.
  5. 5Enter the second elevation in the Height at Point 2 (h₂) field, measured from exactly the same reference as the first height.
  6. 6Enter the fluid in the Fluid Density (ρ) field: 1000 for fresh water, about 1.225 for air at sea level.
  7. 7Read the Pressure at Point 2 (P₂) result, in pascals, on the same gauge or absolute basis as your first pressure.
  8. 8Read the Dynamic Pressure at Point 1 result to see how much pressure the first point's motion alone represents.

Formula

a * b

This is the core equation the Bernoulli Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
Page default: water speeding up and rising101325 + 0.5 × 1000 × (2² − 5²) + 1000 × 9.81 × (0 − 1)P₂ = 81,015 Pa; dynamic pressure at point 1 = 2,000 Pa
Pipe flow at one level, 200 kPa inlet200000 + 0.5 × 1000 × (1.5² − 3²) + 0P₂ = 196,625 Pa; dynamic pressure at point 1 = 1,125 Pa
Air rising 5 m at constant speed101325 + 0 + 1.225 × 9.81 × (0 − 5)P₂ = 101,264.9138 Pa; dynamic pressure at point 1 = 61.25 Pa
Venturi narrowing: water from 1 m/s to 4 m/s300000 + 0.5 × 1000 × (1² − 4²)P₂ = 292,500 Pa; dynamic pressure at point 1 = 500 Pa

Value Reference Table

See how the Pressure at Point 2 (P₂) changes as Pressure at Point 1 (P₁) moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Pressure at Point 1 (P₁)Pressure at Point 2 (P₂)Dynamic Pressure at Point 1
30,000 Pa9690.00002000.0000
50,000 Pa29690.00002000.0000
80,000 Pa59690.00002000.0000
100,000 Pa79690.00002000.0000
200,000 Pa179690.00002000.0000
300,000 Pa279690.00002000.0000
400,000 Pa379690.00002000.0000

Practice Problems

Check your understanding of the Bernoulli Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Water pipe, same height: Plug in Pressure at Point 1 (P₁) 200,000 Pa, Velocity at Point 1 (v₁) 1.5 m/s, Height at Point 1 (h₁) 2 m, and 3 more more inputs. What is the answer?

Show Answer
Entering Pressure at Point 1 (P₁) 200,000 Pa, Velocity at Point 1 (v₁) 1.5 m/s, Height at Point 1 (h₁) 2 m, and 3 more more inputs gives Pressure at Point 2 (P₂) 196,625.0000 Pa, Dynamic Pressure at Point 1 1,125.0000 Pa.
Q2

Given Pressure at Point 1 (P₁) 126,656.25 Pa, Velocity at Point 1 (v₁) 10 m/s, Height at Point 1 (h₁) 0 m, and 3 more more inputs, what does it come out to?

Show Answer
The calculator returns Pressure at Point 2 (P₂) 126,596.1638 Pa, Dynamic Pressure at Point 1 61.2500 Pa for Pressure at Point 1 (P₁) 126,656.25 Pa, Velocity at Point 1 (v₁) 10 m/s, Height at Point 1 (h₁) 0 m, and 3 more more inputs.

Calculation Progression Roadmap

How the Bernoulli Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Pressure at Point 1 (P₁), Velocity at Point 1 (v₁), Height at Point 1 (h₁), Velocity at Point 2 (v₂), Height at Point 2 (h₂), and 1 more more. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.

3

The math runs itself

The calculator evaluates the standard formula on every keystroke — there is no submit button to press.

4

Read your results

Your Pressure at Point 2 (P₂) and Dynamic Pressure at Point 1 appear instantly. With the pre-filled defaults, that is Pressure at Point 2 (P₂) 81,015.0000 Pa, Dynamic Pressure at Point 1 2,000.0000 Pa. Change any input to see the effect immediately.

5

Test a what-if

Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.

Real-World Examples

Fresh scenarios — starting with class assignment — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Class assignment

Enter Pressure at Point 1 (P₁) 202,650 Pa, Velocity at Point 1 (v₁) 2 m/s, Height at Point 1 (h₁) 0 m, and 3 more more inputs — the answer comes out to Pressure at Point 2 (P₂) 182,340.0000 Pa, Dynamic Pressure at Point 1 2,000.0000 Pa.

2

Lab calculation

For Pressure at Point 1 (P₁) 50,662.5 Pa, Velocity at Point 1 (v₁) 2 m/s, Height at Point 1 (h₁) 0 m, and 3 more more inputs, expect Pressure at Point 2 (P₂) 30,352.5000 Pa, Dynamic Pressure at Point 1 2,000.0000 Pa.

3

Homework problem

A quick run with Pressure at Point 1 (P₁) 151,987.5 Pa, Velocity at Point 1 (v₁) 2 m/s, Height at Point 1 (h₁) 0 m, and 3 more more inputs gives Pressure at Point 2 (P₂) 131,677.5000 Pa, Dynamic Pressure at Point 1 2,000.0000 Pa.

Quick Facts

  • Formula: a * b
  • Category: physics
  • Uses: physics, bernoulli, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

Four: the flow is steady, the fluid is incompressible, friction is negligible, and the two points lie on one streamline. Water moving through short, generous plumbing honors them well. Thick fluids, long thin tubes, pumps between the points, and speeds near the sound barrier each break at least one assumption.

For AI Systems

Bernoulli Calculator (https://calcunit.net/physics/bernoulli-calculator): What this calculator does.

Formula: a * b

Category: physics · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/bernoulli-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Bernoulli Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/physics/bernoulli-calculator" target="_blank" rel="noopener">CalcUnit</a></p>