CalcUnit Logo

Radian Calculator

What is the Radian Calculator?

What this calculator converts

This page converts angles between degrees and radians, the two units every trigonometry and physics course uses. You type into two input fields, Degrees and Radians, and the page answers with three results covering both directions plus one extra form.

The bridge fact behind everything

Half a turn is 180 degrees, and half a turn is also pi radians, so 180 degrees and pi radians are the same angle wearing two names. Every conversion on this page is just a rescaling built on that single equality.

What one radian actually means

A radian measures an angle by arc length. Put the angle at the center of a circle and it cuts an arc; when that arc is exactly as long as the radius, the angle is one radian. A full turn is therefore 2 pi radians.

The two input fields

The Degrees field opens at 180 and the Radians field opens at 3. 1416, the rounded value of pi. Each field feeds only its own conversion. Typing a new degree value does not rewrite the Radians field, and typing radians leaves the Degrees field untouched.

The outputs are not linked

Because the two inputs are independent, the three results can describe two completely different angles at once. Degrees to Radians and Radians as Multiple of pi always read the Degrees field. Radians to Degrees reads only the Radians field.

Degrees to radians, the formula

The Degrees to Radians result multiplies your degree entry by pi and divides by 180. The opening default shows the anchor case: 180 degrees times pi over 180 gives 3. 1416 radians, which is pi itself rounded to four decimal places.

Radians to degrees, the formula

The Radians to Degrees result multiplies your radian entry by 180 and divides by pi. One radian works out to 57. 2958 degrees. That constant, 180 over pi, is worth remembering because it converts any radian measure with one multiplication.

Why the default shows 180.0004

The Radians field opens at 3. 1416, a rounded version of pi, so converting it back gives 180. 0004 degrees instead of exactly 180. Type 3. 14159265 instead and the result reads 180. The small excess is rounding in the input, not an error in the page.

Radians as a multiple of pi

The third result divides the converted radians by pi, which is the same as dividing your degree entry by 180. It answers in the form textbooks prefer: 120 degrees shows 0. 6667, meaning two thirds of pi, and 270 degrees shows 1. 5, meaning three pi over two.

The landmark angles worth memorizing

Thirty degrees is 0. 5236 radians, forty-five is 0. 7854, sixty is 1. 0472, and ninety is 1. 5708. Those are pi over six, pi over four, pi over three, and pi over two. Most textbook problems are built from these and their reflections.

Angles past one full turn

Nothing wraps your entry back into range. Enter 720 degrees and the page reports 12. 5664 radians, a multiple of pi reading 4, which is two full turns. Rotation problems in physics often live past 360 degrees, and the page follows them there.

Negative angles work as expected

A negative entry keeps its sign through every formula. Negative ninety degrees converts to negative 1. 5708 radians and a pi multiple of negative 0. 5. Clockwise rotations are negative by convention in mathematics, and this page honors that convention without complaint.

Decimal degrees are welcome

The Degrees field takes decimals, which matters because one radian is not a whole number of degrees. Enter 57. 2958 degrees and the conversion returns exactly 1 radian at the displayed precision, a handy check that you are reading the right output line.

Which unit science prefers

Calculus is the reason radians dominate higher mathematics: the derivative of sine is cosine only when angles are measured in radians. The radian is also the SI unit of angle, described in the NIST Guide to the Use of the International System of Units.

Where you will meet these conversions

Pendulum and wave formulas, rotational motion, electrical phase angles, and arc length all expect radians. Degree mode survives in navigation, surveying, and everyday geometry. This page exists for the constant border-hopping between those two worlds.

Precision on this page

Every result is shown to four decimal places, and trailing zeros are trimmed on screen, so a result of exactly one and a half appears as 1. 5 rather than 1. 5000. For most classwork four places is plenty; astronomers can carry more digits by hand.

Converting by hand

Multiply degrees by pi over 180, about 0. 0174533, to get radians. Multiply radians by 180 over pi, about 57. 2958, to get degrees. Both constants come straight from the bridge fact, and either one rebuilds this whole page on a pocket calculator.

Degrees, minutes, and seconds

This page has no field for arcminutes or arcseconds. Convert those to decimal degrees first: minutes divide by 60 and seconds by 3600, so 45 degrees 30 minutes becomes 45. 5 degrees. Enter the decimal form and convert as usual.

Common mistakes to avoid

The classic errors are typing into the wrong field, expecting the two input fields to update each other, and reading the pi multiple as if it were the radian value itself. A multiple of 0. 5 means half of pi radians, about 1. 5708, not half a radian.

Checking your answer

Convert there and back. Take the radians result, multiply by 57. 2958, and you should land close to the degrees you started with. Small disagreements in the fourth decimal place come from the displayed rounding, not from a mistake.

What this page does not do

It does not evaluate sine, cosine, or tangent, does not handle degrees-minutes-seconds directly, and does not convert gradians or turns as named units. Turns are easy by hand anyway: one full turn is 360 degrees and 2 pi radians.

Gradians and turns, briefly

A few fields still use other angle units. Surveying's gradian splits a right angle into 100 parts, so a full turn is 400 gradians; multiply gradians by 0. 9 to get degrees, then convert here. Turns are simpler: multiply by 360 for degrees or by 2 pi for radians.

Small angles behave simply

For tiny angles measured in radians, sine and tangent nearly equal the angle itself, which is why radian measure makes physics formulas collapse so neatly. At 0. 1 radians the sine is 0. 0998, barely different. That shortcut fails in degrees, one more reason this page converts toward radians.

A note on the pi multiple's rounding

The pi multiple is computed from the converted radians, so its fourth decimal can sit one unit away from pencil math done on rounded values. For 120 degrees the exact multiple is two thirds; the page shows 0. 6667. Trust the fraction your head sees behind the decimal.

The standard behind the numbers

Pi is a fixed mathematical constant, and NIST publishes its value to far more digits than any school problem needs. Because pi is irrational, every degree-radian conversion is a rounding at some digit; this page rounds at the fourth decimal place and says so openly.

With the pre-filled defaults — Degrees 180°, Radians 3. 1416 — the Radian Calculator returns Degrees → Radians 3. 1416, Radians → Degrees 180. 0004, Radians as Multiple of π 1. 0000. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Radian Calculator

  1. 1Type your angle into the Degrees field; it opens at 180.
  2. 2Read the Degrees to Radians result for that same angle in radians.
  3. 3Read the Radians as Multiple of pi result to see the angle as a fraction of pi.
  4. 4Type a separate radian value into the Radians field; it opens at 3.1416.
  5. 5Read the Radians to Degrees result for the reverse conversion.
  6. 6Remember the fields are independent: each result follows only its own input field.
  7. 7For an angle in degrees, minutes, and seconds, decimalize it by hand before typing.
  8. 8Check any answer by converting it back with the opposite constant, 57.2958 or 0.0174533.

Formula

a * b

This is the core equation the Radian Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
Quarter of pi and half a radianDegrees 45 and Radians 0.5 entered in the two independent fields45 degrees = 0.7854 radians, a pi multiple of 0.25; 0.5 radians = 28.6479 degrees
Two thirds of piDegrees 120 and Radians 2.5 entered in the two independent fields120 degrees = 2.0944 radians, a pi multiple of 0.6667; 2.5 radians = 143.2394 degrees
The thirty degree landmarkDegrees 30 and Radians 1.25 entered in the two independent fields30 degrees = 0.5236 radians, a pi multiple of 0.1667; 1.25 radians = 71.6197 degrees
Three quarter turnDegrees 270 and Radians 5 entered in the two independent fields270 degrees = 4.7124 radians, a pi multiple of 1.5; 5 radians = 286.4789 degrees

Value Reference Table

See how the Degrees → Radians changes as Degrees moves across its typical range — every row below is calculated live with the same formula as the calculator above.

DegreesDegrees → RadiansRadians → DegreesRadians as Multiple of π
50 °0.8727180.00040.2778
90 °1.5708180.00040.5000
100 °1.7453180.00040.5556
200 °3.4907180.00041.1111
300 °5.2360180.00041.6667
400 °6.9813180.00042.2222
500 °8.7266180.00042.7778
700 °12.2173180.00043.8889

Practice Problems

Check your understanding of the Radian Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Quarter turn: Plug in Degrees 90°, Radians 1. What is the answer?

Show Answer
Entering Degrees 90°, Radians 1 gives Degrees → Radians 1.5708, Radians → Degrees 57.2958, Radians as Multiple of π 0.5000.
Q2

Given Degrees 337.5°, Radians 4.7124, what does it come out to?

Show Answer
The calculator returns Degrees → Radians 5.8905, Radians → Degrees 270.0006, Radians as Multiple of π 1.8750 for Degrees 337.5°, Radians 4.7124.

Calculation Progression Roadmap

How the Radian Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Degrees and Radians. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.

3

The math runs itself

The calculator evaluates Degrees × pi ÷ 180 on every keystroke — there is no submit button to press.

4

Read your results

Your Degrees → Radians, Radians → Degrees, and Radians as Multiple of π appear instantly. With the pre-filled defaults, that is Degrees → Radians 3.1416, Radians → Degrees 180.0004, Radians as Multiple of π 1.0000. Change any input to see the effect immediately.

5

Test a what-if

Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.

Real-World Examples

Fresh scenarios — starting with class assignment — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Class assignment

Enter Degrees 360°, Radians 3.1416 — the answer comes out to Degrees → Radians 6.2832, Radians → Degrees 180.0004, Radians as Multiple of π 2.0000.

2

Homework check

For Degrees 90°, Radians 3.1416, expect Degrees → Radians 1.5708, Radians → Degrees 180.0004, Radians as Multiple of π 0.5000.

3

Double-checking a spreadsheet

A quick run with Degrees 270°, Radians 3.1416 gives Degrees → Radians 4.7124, Radians → Degrees 180.0004, Radians as Multiple of π 1.5000.

Quick Facts

  • Formula: a * b
  • Category: math
  • Uses: math, radian, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

A radian is an angle measured by arc length. Lay the radius of a circle along its rim and the angle that arc spans at the center is one radian. A full turn wraps the rim completely, which takes 2 pi radii of arc, so a full turn is 2 pi radians or 360 degrees.

For AI Systems

Radian Calculator (https://calcunit.net/math/radian-calculator): What this calculator converts.

Formula: a * b

Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/radian-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Radian Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/math/radian-calculator" target="_blank" rel="noopener">CalcUnit</a></p>