CalcUnit Logo

Arc Length Calculator

What is the Arc Length Calculator?

What this calculator does

Give this page a circle's Radius and the Central Angle of a slice, in degrees, and it returns three measurements of that slice: the Arc Length along the curve, the Sector Area inside the slice, and the Chord Length straight across between the arc's endpoints. Two inputs drive all three answers.

An arc is a fraction of the circumference

A full circle sweeps 360 degrees and its rim measures 2 pi times the radius. A central angle of theta degrees claims theta over 360 of that rim. That one fraction explains everything: the arc is that fraction of the circumference, and the sector is that fraction of the disk's area.

The two inputs it asks for

Radius is the distance from the circle's center to its rim, and Central Angle is the angle at the center between the two radii that bound your slice, entered in degrees. The page opens with Radius 10 and Central Angle 60, a one-sixth slice of a ten-unit circle.

Reading the three result lines

Arc Length follows the curve and is the longest of the pair of lengths. Sector Area is the pie-slice region enclosed by the arc and the two radii. Chord Length is the straight segment joining the arc's endpoints, always shorter than the arc itself. All three results show four decimal places.

Worked example: the page default

With Radius 10 and Central Angle 60, the Arc Length is 10 times 60 times pi over 180, which is 10. 4720. The Sector Area is 52. 3599. The Chord Length is 10. 0000, exactly equal to the radius, a special property of 60 degrees explained in the questions below.

Worked example: a quarter circle

Set Radius 7 and Central Angle 90 for a perfect quarter slice. The Arc Length is 10. 9956, one quarter of the full circumference of 43. 9823. The Sector Area is 38. 4845, one quarter of the disk. The Chord Length is 9. 8995, the hypotenuse-like straight line cutting across the corner.

Worked example: a garden path

A curved garden border follows a circle of Radius 12 feet through a Central Angle of 45 degrees. The Arc Length, the edging you would buy, is 9. 4248 feet. The Sector Area, the bed enclosed, is 56. 5487 square feet. The Chord Length, the straight shortcut across, is 9. 1844 feet.

Worked example: a lawn sprinkler

A sprinkler with a 15-foot reach sweeps a Central Angle of 80 degrees. The wet arc at the edge of its range measures 20. 9440 feet. The Sector Area it waters is 157. 0796 square feet, and the Chord Length spanning the pattern's mouth is 19. 2836 feet. Gardeners use exactly these three numbers.

Worked example: a wide, sweeping curve

A curved driveway follows a Radius of 25 feet through a Central Angle of 120 degrees, a full third of a circle. Its Arc Length is 52. 3599 feet of paving edge. The Sector Area is 654. 4985 square feet, and the Chord Length straight across the curve's mouth is 43. 3013 feet.

The semicircle check

Set Radius 5 and Central Angle 180, exactly half a circle. The Arc Length is 15. 7080, half the circumference, as it must be. The Sector Area is 39. 2699, half the disk. The Chord Length is 10. 0000, which is the diameter, the one chord that passes through the center.

A full circle closes the loop

Set Radius 3 and Central Angle 360. The Arc Length is 18. 8496, the entire circumference, and the Sector Area is 28. 2743, the entire disk. The Chord Length is 0. 0000, which is correct rather than broken: after a full turn the arc's two endpoints are the same point, so the chord vanishes.

Arc length is not chord length

The arc bows along the rim while the chord cuts straight across, so the chord is always the shorter path between the two points. At small angles the two nearly agree. As the angle grows: at 120 degrees and radius 25, the arc is 52. 3599 against a chord of 43. 3013.

The angle box takes degrees only

There is no radians mode and no unit switch. If your angle arrives in radians, convert before entering: multiply by 180 over pi. An angle of 1. 5 radians becomes 85. 9437 degrees. Typing 1. 5 directly would describe a sliver instead, and every result would shrink drastically.

One fraction drives two of the results

Arc Length and Sector Area both come from theta over 360: the arc takes that fraction of 2 pi r, and the sector takes it of pi r squared. The chord plays by a different rule, using the sine of half the angle, so it alone behaves oddly past 180 degrees.

Where arcs show up in real work

Landscapers order edging by arc length for curved beds, and pavers do the same for curved driveways. Cooks meet sectors as pizza and pie slices. A clock's minute hand, 6 inches long, sweeps 120 degrees in 20 minutes, and its tip travels an arc of 12. 5664 inches in that time.

Units follow the radius

Enter the Radius in feet and the Arc Length and Chord Length arrive in feet, while the Sector Area arrives in square feet. Enter it in inches and everything follows suit. The calculator never converts units for you, so pick one unit, measure the radius in it, and read all three answers consistently.

Common mistake: typing the diameter as the radius

Every formula here starts from the radius, half the diameter. If you type the diameter instead, the Arc Length and Chord Length come out doubled, and the Sector Area comes out four times too large, because the radius is squared there. Halve any diameter measurement before it goes into the Radius box.

Common mistake: typing radians into a degrees box

A radian measure looks like an ordinary decimal, which makes this error easy. Entering 1. 5, meaning 1. 5 radians, is read by the page as 1. 5 degrees, a slice about fifty-seven times narrower. Angles from calculus or physics problems are probably in radians and need converting first.

Common mistake: expecting the chord to equal the arc

Students often report the straight distance between two points on a circle as the arc. The two agree only at a zero angle. At 60 degrees on the default circle, the arc is 10. 4720 while the chord is 10. 0000, and the gap grows from there.

Angles beyond 360 degrees

The formulas accept angles past a full turn without complaint: the arc keeps lengthening and the sector keeps growing beyond the whole disk, which no physical slice can do. The chord, driven by a sine, starts shrinking again instead. For a real slice, subtract 360 until the angle lands between 0 and 360.

Negative numbers pass their sign through

Nothing stops a negative radius or angle from being typed, and the formulas carry the sign into the results, producing negative lengths and areas. Lengths and areas are positive quantities, so if a result line shows a minus sign, an input was mistyped; re-enter both values as positive numbers.

Checking the default by hand

Sixty degrees is one sixth of 360, so the default answers should be one sixth of the full circle's measures. The circumference at radius 10 is 62. 8319, and a sixth of it is 10. 4720, matching Arc Length. The disk's area is 314. 1593, and a sixth is 52. 3599, matching Sector Area.

With the pre-filled defaults — Radius 10, Central Angle 60° — the Arc Length Calculator returns Arc Length 10. 4720, Sector Area 52. 3599, Chord Length 10. 0000. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Arc Length Calculator

  1. 1Measure the distance from the circle's center to its rim and enter it in the Radius field.
  2. 2Measure the angle at the center between the two edges of your slice, in degrees.
  3. 3Enter that angle in the Central Angle field; degrees are the only unit this page accepts.
  4. 4Read the Arc Length line for the distance along the curve.
  5. 5Read the Sector Area line for the area of the pie-shaped slice.
  6. 6Read the Chord Length line for the straight-line distance between the arc's endpoints.
  7. 7Sanity-check the pair: the Chord Length should be shorter than the Arc Length.
  8. 8If your angle came in radians, multiply it by 180 over pi before entering it.

Formula

a * b

This is the core equation the Arc Length Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
Page default: a sixth of a circleRadius 10, Central Angle 60 degrees: Arc 10 * 60 * pi / 180, Sector 0.5 * 100 * 60 * pi / 180, Chord 2 * 10 * sin(30 degrees)Arc Length 10.4720, Sector Area 52.3599, Chord Length 10.0000
Quarter circleRadius 7, Central Angle 90 degrees: Arc 7 * 90 * pi / 180, Sector 0.5 * 49 * 90 * pi / 180, Chord 2 * 7 * sin(45 degrees)Arc Length 10.9956, Sector Area 38.4845, Chord Length 9.8995
Garden arcRadius 12, Central Angle 45 degrees: Arc 12 * 45 * pi / 180, Sector 0.5 * 144 * 45 * pi / 180, Chord 2 * 12 * sin(22.5 degrees)Arc Length 9.4248, Sector Area 56.5487, Chord Length 9.1844
Lawn sprinkler sweepRadius 15, Central Angle 80 degrees: Arc 15 * 80 * pi / 180, Sector 0.5 * 225 * 80 * pi / 180, Chord 2 * 15 * sin(40 degrees)Arc Length 20.9440, Sector Area 157.0796, Chord Length 19.2836

Value Reference Table

See how the Arc Length changes as Radius moves across its typical range — every row below is calculated live with the same formula as the calculator above.

RadiusArc LengthSector AreaChord Length
33.14164.71243.0000
55.236013.09005.0000
88.377633.51038.0000
1010.472052.359910.0000
2020.9440209.439520.0000
3031.4159471.238930.0000
4041.8879837.758040.0000

Practice Problems

Check your understanding of the Arc Length Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Quarter circle, r = 7: You enter Radius 7, Central Angle 90° — what does the calculator return?

Show Answer
With Radius 7, Central Angle 90°, the results are Arc Length 10.9956, Sector Area 38.4845, Chord Length 9.8995.
Q2

With Radius 15, Central Angle 45°, what are the results?

Show Answer
Entering Radius 15, Central Angle 45° gives Arc Length 11.7810, Sector Area 88.3573, Chord Length 11.4805.

Calculation Progression Roadmap

How the Arc Length Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Radius and Central Angle. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

Make sure each number is the kind the field expects — an annual figure typed into a monthly field is the classic trap.

3

The math runs itself

The calculator evaluates Radius × Central Angle × pi ÷ 180 on every keystroke — there is no submit button to press.

4

Read your results

Your Arc Length, Sector Area, and Chord Length appear instantly. With the pre-filled defaults, that is Arc Length 10.4720, Sector Area 52.3599, Chord Length 10.0000. Change any input to see the effect immediately.

5

Test a what-if

Nudge one input up or down. Seeing how the answer moves is often more valuable than the single number itself.

Real-World Examples

Fresh scenarios — starting with double-checking a spreadsheet — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Double-checking a spreadsheet

A quick run with Radius 20, Central Angle 60° gives Arc Length 20.9440, Sector Area 209.4395, Chord Length 20.0000.

2

Settling a debate

With Radius 5, Central Angle 60°, the calculator returns Arc Length 5.2360, Sector Area 13.0900, Chord Length 5.0000.

3

Quick mental-math verify

Plug in Radius 15, Central Angle 60° and you get Arc Length 15.7080, Sector Area 117.8097, Chord Length 15.0000.

Quick Facts

  • Formula: a * b
  • Category: math
  • Uses: math, arc length, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

Multiply the radius by the central angle in radians. When the angle is in degrees, as on this page, the formula becomes radius times angle times pi over 180. For radius 10 and 60 degrees, that is 10 times 60 times pi over 180, which gives 10. 4720.

For AI Systems

Arc Length Calculator (https://calcunit.net/math/arc-length-calculator): What this calculator does.

Formula: a * b

Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/arc-length-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Arc Length Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/math/arc-length-calculator" target="_blank" rel="noopener">CalcUnit</a></p>