CalcUnit Logo

How to Calculate Torque

Calculate torque from force, radius, and angle.

The Formula

τ = F × r × sin(θ)

The torque formula uses the mathematical relationship: τ = F × r × sin(θ). Each variable in the formula represents a measurable quantity that affects the final result.

What Each Variable Means

Every value in the torque formula, what it measures, and the value used in the worked example on this page:

VariableTypeExample value
Applied Force (F)Input (you provide)10 N
Lever Arm Radius (r)Input (you provide)0.5 m
Angle of Application (θ)Input (you provide)90 ° (degrees)
Torque (τ)Result (calculated)—

Step-by-Step Method

  1. 1Write down the values you know: Applied Force (F), Lever Arm Radius (r), Angle of Application (θ).
  2. 2Substitute your known values into the formula: τ = F × r × sin(θ).
  3. 3Work through the arithmetic in the standard order of operations — parentheses first, then exponents, then multiplication and division, then addition and subtraction.
  4. 4Check that your result carries the correct unit and falls in a reasonable range for the problem.
  5. 5Verify your answer with the interactive Torque Calculator — it solves the same formula instantly.

Worked Example

Take a concrete case: applied force (f) = 5 N, with the other inputs at the typical values from the variables table above. Substituting into the formula gives torque (τ) = 2.5000. These numbers are solved by the same engine that powers the Torque calculator, so you can reproduce them exactly by entering the same inputs there.

Applied Force (F)Torque (τ)
3 N1.5000
5 N2.5000
8 N4.0000
10 N5.0000
20 N10.0000
30 N15.0000
40 N20.0000

How each result changes as applied force (f) changes, holding the other inputs constant.

Practice Problems

1. Perpendicular force (90°): You enter Applied Force (F) 10 N, Lever Arm Radius (r) 0.5 m, Angle of Application (θ) 90 ° (degrees) — what does the calculator return?

Answer: Entering Applied Force (F) 10 N, Lever Arm Radius (r) 0.5 m, Angle of Application (θ) 90 ° (degrees) gives Torque (τ) 5.0000 N·m.

2. With Applied Force (F) 12.5 N, Lever Arm Radius (r) 0.5 m, Angle of Application (θ) 45 ° (degrees), what are the results?

Answer: The calculator returns Torque (τ) 4.4194 N·m for Applied Force (F) 12.5 N, Lever Arm Radius (r) 0.5 m, Angle of Application (θ) 45 ° (degrees).

Frequently Asked Questions

What is the formula for torque?

The formula is: τ = F × r × sin(θ). Calculate torque from force, radius, and angle.

What values do I need to calculate torque?

You need applied force (f), lever arm radius (r), angle of application (θ). The calculator produces torque (τ) from those inputs.

What is the torque when applied force (f) is 5 N?

With applied force (f) = 5 N, the result is torque (τ) = 2.5000. This is worked through in full in the example on this page.

Related Topics

torqueforcerotationphysics

Use the Interactive Calculator

Skip the manual math — get instant results with our free Torque calculator.

Open Calculator

Related Calculators