How to Calculate Fatigue Strength
Calculates the endurance limit or fatigue strength of a material based on its ultimate tensile strength.
The Formula
tensile_strength * factorThe fatigue strength formula uses the mathematical relationship: tensile_strength * factor. Each variable in the formula represents a measurable quantity that affects the final result.
What Each Variable Means
Every value in the fatigue strength formula, what it measures, and the value used in the worked example on this page:
| Variable | Type | Example value |
|---|---|---|
| Tensile Strength (S_ut, MPa) | Input (you provide) | 500 |
| Fatigue limit factor | Input (you provide) | 0.5 |
| Fatigue Limit / Strength (MPa) | Result (calculated) | — |
Step-by-Step Method
- 1Write down the values you know: Tensile Strength (S_ut, MPa), Fatigue limit factor.
- 2Substitute your known values into the formula: tensile_strength * factor.
- 3Work through the arithmetic in the standard order of operations — parentheses first, then exponents, then multiplication and division, then addition and subtraction.
- 4Check that your result carries the correct unit and falls in a reasonable range for the problem.
- 5Verify your answer with the interactive Fatigue Strength Calculator — it solves the same formula instantly.
Worked Example
Take a concrete case: tensile strength (s_ut, mpa) = 300, with the other inputs at the typical values from the variables table above. Substituting into the formula gives fatigue limit / strength (mpa) = 150.00. These numbers are solved by the same engine that powers the Fatigue Strength calculator, so you can reproduce them exactly by entering the same inputs there.
| Tensile Strength (S_ut, MPa) | Fatigue Limit / Strength (MPa) |
|---|---|
| 100 | 50.00 |
| 300 | 150.00 |
| 400 | 200.00 |
| 500 | 250.00 |
| 600 | 300.00 |
| 800 | 400.00 |
| 1,000 | 500.00 |
| 2,000 | 1000.00 |
How each result changes as tensile strength (s_ut, mpa) changes, holding the other inputs constant.
Practice Problems
1. Example calculation: Tensile Strength (S_ut, MPa) 500, Fatigue limit factor 0.5 — work it out, then check the answer.
Answer: The calculator returns Fatigue Limit / Strength (MPa) 250.00 for Tensile Strength (S_ut, MPa) 500, Fatigue limit factor 0.5.
Frequently Asked Questions
What is the formula for fatigue strength?
The formula is: tensile_strength * factor. Calculates the endurance limit or fatigue strength of a material based on its ultimate tensile strength.
What values do I need to calculate fatigue strength?
You need tensile strength (s_ut, mpa), fatigue limit factor. The calculator produces fatigue limit / strength (mpa) from those inputs.
What is the fatigue strength when tensile strength (s_ut, mpa) is 300?
With tensile strength (s_ut, mpa) = 300, the result is fatigue limit / strength (mpa) = 150.00. This is worked through in full in the example on this page.
Related Topics
Use the Interactive Calculator
Skip the manual math — get instant results with our free Fatigue Strength calculator.
