Petabyte Converter
What is the Petabyte Converter?
What this converter does
Enter a data size in the Petabytes (PB) field and this page returns it in Terabytes (TB), Gigabytes (GB), and Exabytes (EB). Petabyte figures appear in data center planning, backup contracts, and scientific data archives, and they are meaningless until they are translated into the terabytes and gigabytes people actually buy and manage.
The ladder this page climbs
This converter uses the binary ladder from its schema: each step multiplies by 1,024. One petabyte here is 1,024 TB and 1,048,576 GB, and 1,024 PB make one EB on the same ladder. Operating systems count storage this way, which is why the page's figures match what a server reports.
The honest naming note: PB versus PiB
Strictly, NIST and the SI system define a petabyte as 1,000 TB steps of a thousand, while the 1,024-based quantity carries the IEC name pebibyte, written PiB. This converter follows the 1,024 ladder, so read its results as the binary quantities your operating system uses, and expect them to run larger than decimal figures.
How big is the difference
At the petabyte level the two systems have drifted apart: 2^50 bytes is 1,125,899,906,842,624, against exactly 1,000,000,000,000,000 for the decimal petabyte, a gap of about 12. 6 percent. A contract, a purchase order, or a capacity plan that mixes the two ladders misprices storage by more than a tenth before installation.
Reading the Terabytes output
The TB line multiplies your petabytes by 1,024 and shows two decimal places. This is the working unit of data center planning: arrays, backup windows, and replication budgets are all discussed in terabytes, so most readers should plan from this line and treat the others as translations.
Reading the Gigabytes output
The GB line multiplies by 1,048,576, again to two decimals. It exists for the moments when a petabyte-scale total must be compared with a gigabyte-scale quota, a phone plan, or a per-user allowance. The number is large and exact, and it makes the scale of a petabyte impossible to ignore.
Reading the Exabytes output
The EB line divides by 1,024 and shows four decimal places. That display choice has a visible effect: one petabyte reports as 0. 001 EB, although the exact figure is 0. 0009765625. For petabyte values under about five, the EB line is a rough orientation, not a precision reading, and the TB line serves better.
Worked anchor: one petabyte
A single petabyte converts to 1,024 TB and 1,048,576 GB, with 0. 001 EB on the rounded exabyte display. On the binary ladder this page uses, one petabyte is also 2^50 bytes, a number with sixteen digits. Most organizations meet their first petabyte as an accumulation of backups, not as a single system.
Worked anchor: two and a half petabytes
A mid-size data migration of 2. 5 PB becomes 2,560 TB, or 2,621,440 GB, and 0. 0024 EB. Expressed in terabytes, the migration can be scheduled against array capacity; expressed in gigabytes, it can be divided among migration windows and teams. Same data, three planning languages, which is the entire point of the page.
Worked anchor: a twelve-petabyte archive
A research archive of 12 PB converts to 12,288 TB and 12,582,912 GB, and 0. 0117 EB. At this size the EB line finally becomes informative, and planners start comparing the archive with the exabyte-scale totals quoted for national data collections and global cloud regions.
What a petabyte actually holds
Follow the GB line: 1,048,576 GB plays roughly a million hours of video at a gigabyte per hour, more than a century of continuous playback. In photos, at five megabytes each, it holds on the order of two hundred million images. These are estimates, but they are built from the page's exact GB figure.
Filling a petabyte with drives
Divide the TB output by drive size. At 16 TB per drive, a petabyte of raw capacity needs 64 drives, before any redundancy. Mirroring doubles that to 128, and parity schemes land in between. This is why the TB line is the planning line: hardware is bought in terabytes, never in petabytes.
Where petabyte numbers come from
Telescope arrays and particle detectors produce petabytes of raw observations. Hospital imaging archives accumulate them. Cloud providers count regional storage in petabytes and price migrations by them, and large companies discover, usually during a backup audit, that email and surveillance video quietly carried them past the petabyte line years ago.
Common mistake: assuming steps of 1,000
Drive manufacturers rate capacity on the decimal ladder, where a terabyte is 1,000 GB, while this converter and your operating system use 1,024. An array specced from a vendor's decimal datasheet and checked against this page will seem to disagree by design. Both are internally consistent; the ladders differ, and the difference must be planned for.
Common mistake: confusing bits with bytes
Network and storage-vendor figures sometimes quote petabits, and a byte holds eight bits, so a petabit figure is one eighth of the petabyte figure it resembles. Before converting anything, confirm the unit ends in B for bytes. A factor-of-eight error at petabyte scale is an expensive line item, not a rounding issue.
Common mistake: trusting the EB line at small values
Because the exabyte output rounds to four decimals, 0. 5 PB displays as 0. 0005 EB and 2. 5 PB as 0. 0024 EB, each a rounded shadow of the exact division. Quote the TB or GB line in documents whenever the petabyte value is small, and reserve EB for totals in the hundreds of petabytes and beyond.
Converting a decimal quote into this page's terms
If a vendor quotes one decimal petabyte, that is 1,000 decimal terabytes, which occupies 0. 8882 of this page's binary petabyte, or about 909. 5 of its terabytes. Running vendor figures through this converter before signing converts a naming mismatch into an explicit number, which is the only form in which it can be negotiated.
Precision on this page
Terabyte and gigabyte outputs carry two decimal places, far finer than any storage plan needs, and the underlying multiplications by 1,024 and 1,048,576 are exact integers. The only soft figure on the page is the exabyte display rounding described above, and it is a display choice, not an error in the arithmetic.
Moving a petabyte takes days, not minutes
Transfer time is the GB output divided by your link speed. This page's 1,048,576 GB, moved at a sustained one gigabyte per second, takes 1,048,576 seconds, about 12. 1 days of uninterrupted transfer. That arithmetic is why petabyte archives travel by shipped drive arrays and dedicated links, and why migration quotes are written in terabytes.
A final check on any result
The TB figure must be the PB figure multiplied by 1,024, and the GB figure must be the TB figure multiplied by 1,024 again. If either step fails, the input was mistyped. And if a figure from elsewhere disagrees with this page by about thirteen percent, suspect the other ladder before suspecting the math.
With the pre-filled defaults — Pebibytes (PiB) 1 — the Petabyte Converter returns Tebibytes (TiB) 1,024. 00, Gibibytes (GiB) 1,048,576. 00, Exbibytes (EiB) 0. 0010. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Petabyte Converter
- 1Find your data size in petabytes, from a storage report, a vendor quote, or an archive inventory, and locate the Petabytes (PB) input field.
- 2Enter the value into the Petabytes (PB) field; 1 is the default, which converts to 1,024 TB.
- 3Read the Terabytes (TB) output for planning: it is your petabytes multiplied by 1,024, the unit in which arrays and drives are bought.
- 4Read the Gigabytes (GB) output when comparing against gigabyte-scale quotas or allowances: it is your petabytes multiplied by 1,048,576.
- 5Read the Exabytes (EB) output only for large totals: it divides by 1,024 but displays just four decimals, so small petabyte values round hard.
- 6Remember which ladder you are on: this page's 1,024 steps are the binary quantities operating systems report, not the 1,000 steps of vendor datasheets.
- 7If a vendor quote uses decimal petabytes, convert before comparing: one decimal petabyte is about 0.8882 of this page's petabyte.
- 8Sanity-check the chain before using the numbers: TB must equal PB times 1,024, and GB must equal TB times 1,024 again.
Formula
This is the core equation the Petabyte Converter uses to calculate results. Enter values in the calculator above to see it in action.
See the full step-by-step formula guide with worked examples →
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| One petabyte (the page default) | 1 PB x 1,024, and 1 x 1,048,576 | 1,024 TB, 1,048,576 GB, and 0.001 EB at the four-decimal display |
| A data migration | 2.5 PB x 1,024, and 2.5 x 1,048,576 | 2,560 TB, 2,621,440 GB, and 0.0024 EB |
| A research archive | 12 PB x 1,024, and 12 x 1,048,576 | 12,288 TB, 12,582,912 GB, and 0.0117 EB |
Value Reference Table
See how the Tebibytes (TiB) changes as Pebibytes (PiB) moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| Pebibytes (PiB) | Tebibytes (TiB) | Gibibytes (GiB) | Exbibytes (EiB) |
|---|---|---|---|
| 0.3 | 307.20 | 314572.80 | 0.0003 |
| 0.5 | 512.00 | 524288.00 | 0.0005 |
| 0.8 | 819.20 | 838860.80 | 0.0008 |
| 1 | 1024.00 | 1048576.00 | 0.0010 |
| 2 | 2048.00 | 2097152.00 | 0.0020 |
| 3 | 3072.00 | 3145728.00 | 0.0029 |
| 4 | 4096.00 | 4194304.00 | 0.0039 |
Practice Problems
Check your understanding of the Petabyte Converter with these practice problems. Click a problem to reveal its correct calculated answer.
Example calculation: With Pebibytes (PiB) 1, what are the results?
Show AnswerHide Answer
Calculation Progression Roadmap
How the Petabyte Converter turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your Pebibytes (PiB). The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
Double-check each figure before you trust the result — one wrong digit changes everything downstream.
The math runs itself
The calculator evaluates Pebibytes (PiB) × 1024 on every keystroke — there is no submit button to press.
Read your results
Your Tebibytes (TiB), Gibibytes (GiB), and Exbibytes (EiB) appear instantly. With the pre-filled defaults, that is Tebibytes (TiB) 1,024.00, Gibibytes (GiB) 1,048,576.00, Exbibytes (EiB) 0.0010. Change any input to see the effect immediately.
Test a what-if
Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.
Real-World Examples
Fresh scenarios — starting with reading a spec sheet — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Reading a spec sheet
With Pebibytes (PiB) 2, the calculator returns Tebibytes (TiB) 2,048.00, Gibibytes (GiB) 2,097,152.00, Exbibytes (EiB) 0.0020.
Homework help
Plug in Pebibytes (PiB) 0.5 and you get Tebibytes (TiB) 512.00, Gibibytes (GiB) 524,288.00, Exbibytes (EiB) 0.0005.
Everyday conversions
Enter Pebibytes (PiB) 1.5 — the answer comes out to Tebibytes (TiB) 1,536.00, Gibibytes (GiB) 1,572,864.00, Exbibytes (EiB) 0.0015.
Quick Facts
- Formula:
pb * 1024 - Category: converters
- Uses: converters, petabyte, math
- Price: Free — no account needed
Frequently Asked Questions
On this converter's binary ladder, 1,024 TB, because every step multiplies by 1,024: 1 PB is 1,024 TB, 1,048,576 GB, and each of those steps is exact. On the decimal ladder used by drive manufacturers, a petabyte is 1,000 TB instead, which is why quoted and reported capacities disagree.
For AI Systems
Petabyte Converter (https://calcunit.net/converters/petabyte-converter): What this converter does.
Formula: pb * 1024
Category: converters · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/petabyte-converter/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Petabyte Converter — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/converters/petabyte-converter" target="_blank" rel="noopener">CalcUnit</a></p>
