CalcUnit Logo

Mean Median Mode Calculator

What is the Mean Median Mode Calculator?

What this page computes

The name promises three statistics, and the page delivers all three: Mean, Median, and Mode, the Mode with its Mode Frequency beside it. Sum, Minimum, Maximum, and Range complete the output list: eight lines, all computed from your five values.

Five boxes and no count option

The form holds exactly five boxes, Value 1 through Value 5, prefilled with 4, 7, 13, 7, and 3. Every formula reads all five boxes. There is no count menu at all, so five values is not a setting; it is the whole design.

No sorting needed

Enter the values in any order. The page sorts them internally to find the median, so the middle box holds nothing special: it is simply your third entry. Read the Median line for the middle value, never the position of a box.

The defaults worked end to end

With 4, 7, 13, 7, and 3 in the boxes, the Sum is 34, the Mean is 6. 8, the Minimum is 3, the Maximum is 13, and the Range is 10. The Median is 7 and the Mode is 7, with a Mode Frequency of 2, because 7 alone repeats.

Order changes nothing

Enter 21, 12, 30, 15, and 15 in that scrambled order and the results match the sorted entry exactly: Sum 93, Mean 18. 6, Minimum 12, Maximum 30, Range 18, Median 15, and Mode 15 with a frequency of 2. The page does the sorting; you just type.

A data set with no mode

Five test scores, 85, 90, 78, 92, and 88, give a Sum of 433, a Mean of 86. 6, a Minimum of 78, a Maximum of 92, and a Range of 14. Every score appears once, so the Mode Frequency reads 1 and the Mode line shows a dash. The Median is 88.

Two modes can tie

Enter 2, 2, 5, 9, and 9 and the Sum is 27, the Mean is 5. 4, the Median is 5, and the Range is 7. Both 2 and 9 appear twice, a tie the page breaks by entry order: the Mode reads 2, the value you typed first. The set is bimodal; report both.

What the Mode Frequency adds

A mode without its count is half a fact. A mode appearing twice in five values is a weak pattern; one appearing four times is the story of the data set. The Mode Frequency line prints that count beside the mode, so you can judge how strongly the most common value dominates.

One wild value moves only the mean

With 6, 7, 7, 8, and 42, the Sum is 70 and the Mean is 14, dragged up by the 42. The Median is 7 and the Mode is 7 with a frequency of 2, both unmoved. The mean listens to every value; the median and mode listen to position and frequency.

The three concepts, plainly

The mean is the balance point: total shared equally. The median is the middle case: half the data below it, half above. The mode is the most common case. A complete summary names all three, because each one answers a different question about the same numbers.

Even counts are impossible here

The median of four or six values is the mean of the two middle values. This form has exactly five boxes, so even-count data cannot be entered faithfully. Padding with an extra value changes the set and moves the median. Even-count medians stay a hand calculation.

Fewer than five values

There is no clean run for three values either. Zero-padding the empty boxes corrupts the mean, fakes a minimum of 0, and can make 0 the mode. For sets that are not exactly five, add, sort, and count by hand; the methods are short.

Minimum and maximum as a data check

The Minimum and Maximum lines earn their keep as auditors. They should match the smallest and largest values you typed, whatever order you typed them in. If either disagrees with your list, a box was mistyped or a default survived, and every statistic on the page is suspect.

How results are displayed

Every output is carried to four decimal places, with trailing zeros trimmed on screen. A mean of 6. 8 prints as 6. 8 rather than 6. 8000, and a whole-number sum prints with no decimal at all. The Mode line shows a dash whenever the Mode Frequency is 1.

Decimals and negatives work

The boxes accept decimal values and negative values, and every line handles them normally. The median needs no extra care from you with negatives, since the page sorts by value: −2 sits above −8 on the number line even though 8 is the bigger digit.

The mode beyond numbers

The mode is the only one of the three statistics that works on categories, like the most common shirt size or car color in a survey. This page is numbers-only, but the counting idea is the same: tally each value and crown the most frequent.

Units must match

Like every tool of its kind, the page is unit-blind. Five values in mixed units, say three heights in inches and two in centimeters, produce a mean that means nothing. Convert everything to one unit before you enter it.

A quick typing check

Add your five values roughly in your head and compare with the Sum line. A mismatch means a mistyped box, and because the mean divides that same sum and the other lines read the same boxes, one typo poisons every statistic on the page.

What to read first

Read Sum and Mean for the center the page computes, the Median for the middle case, Mode and Mode Frequency for the most common case, and Minimum, Maximum, and Range for the spread. Together they are the complete five-value summary this page exists to give.

Who this page suits

Students meeting the three statistics for the first time, and anyone with exactly five values who wants all three centers without sorting or counting by hand. Used with exactly five real values in the boxes, its name finally tells the truth.

One growing value moves only the mean

Four values stay fixed at 12, 18, 24, and 30 while the fifth climbs through 36, 48, 72, and 120. The sums are 120, 132, 156, and 204, so the means are 24, 26. 4, 31. 2, and 40. 8.

The median stays 24 at every single step, and there is no mode each time, since every value appears once and the Mode line shows a dash. The range grows from 24 to 36, then 60, then 108. The median ignores how far the extreme value travels. The mean chases it.

Five quiz scores with one repeat

Five quiz scores read 72, 81, 81, 88, and 94. The sum is 416 and the mean is 83. 2, just above the median. Sorted, the list is unchanged, so the median is 81. The value 81 appears twice and no other value repeats, so the mode is 81 with a Mode Frequency of 2.

The minimum is 72, the maximum is 94, and the range is 22. Here 81 is both the median and the mode, but that is a coincidence of this set, not a rule.

Five days of step counts

Five daily step counts read 8230, 9120, 9120, 10450, and 11800. The sum is 48720 and the mean is 9744. The sorted middle value is 9120, so the median is 9120. The value 9120 appears twice, so the mode is 9120 with a Mode Frequency of 2. The minimum is 8230, the maximum is 11800, and the range is 3570.

The mean sits above the median because the single 11800 step day pulls it up. A typical day is closer to 9120 steps than to the average of 9744.

Use the median when data leans

When values lean to one side, as incomes, house prices, and wait times do, the median describes the typical case and the mean overstates it. In the ladder above, the mean reaches 40. 8 while the median never leaves 24. Report both numbers when they disagree, because the gap itself tells you the data leans.

That gap is the real warning sign. Use the mean when values are roughly symmetric and every value deserves a say, since it is the figure that feeds the standard deviation and later tests.

Skew sets the order of the three

As a rule of thumb for a single peaked, skewed set, right skew gives mode below median below mean, and left skew reverses the order to mean below median below mode. The step counts fit the right skew pattern: the mode and median are both 9120 and the mean is 9744, the pattern in miniature.

When all three sit close together, the set is roughly symmetric. Check this ordering carefully after you compute all three figures, and never assume it before looking at the numbers.

Where to go next

For the plain average of five values, try average-calculator. For the middle value of a longer list, try median-calculator. To measure spread around the mean, try standard-deviation-calculator. For the average of squared gaps from the mean, try variance-calculator. Each one takes the same five values, so you can move from center to spread without retyping anything.

Start with the average, then always check the median before you trust it. Report all three figures together whenever they disagree.

With the pre-filled defaults — Value 1 4, Value 2 7, Value 3 13, Value 4 7, Value 5 3 — the Mean Median Mode Calculator returns Mean 6. 8000, Minimum 3. 0000, Maximum 13. 0000, Range 10. 0000, Sum 34. 0000, and 3 more more results.

Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Mean Median Mode Calculator

  1. 1Enter your five values into Value 1 through Value 5 in any order, replacing the defaults 4, 7, 13, 7, and 3.
  2. 2Do not sort before typing; the page sorts the values itself when it finds the median.
  3. 3Read the Sum and Mean lines for the total and the arithmetic average of the five values.
  4. 4Read the Median line for the middle value of the sorted set; ignore the position of the middle box.
  5. 5Read the Mode line for the most frequent value, and the Mode Frequency line for how often it appears.
  6. 6If the Mode Frequency reads 1, record that the data set has no mode; the Mode line shows a dash.
  7. 7Read Minimum, Maximum, and Range and confirm the extremes match the smallest and largest values you typed.
  8. 8For four or six values, average the two middle values by hand; the five boxes cannot hold an even set.

Formula

Mean=Σx/n, Median=middle, Mode=most frequent

This is the core equation the Mean Median Mode Calculator uses to calculate results. Enter values in the calculator above to see it in action.

See the full step-by-step formula guide with worked examples →

Common Examples

ScenarioCalculationResult
The prefilled boxes4 + 7 + 13 + 7 + 3 = 34; 34 / 5 = 6.8; sorted 3, 4, 7, 7, 13 gives median 7; 7 appears twice; 13 − 3 = 10Sum 34, Mean 6.8, Median 7, Mode 7, Mode Frequency 2, Minimum 3, Maximum 13, Range 10
Test scores with no mode85 + 90 + 78 + 92 + 88 = 433; 433 / 5 = 86.6; sorted 78, 85, 88, 90, 92 gives median 88; no value repeats; 92 − 78 = 14Sum 433, Mean 86.6, Median 88, no Mode (Mode Frequency 1), Minimum 78, Maximum 92, Range 14
Scrambled entry, same statistics21 + 12 + 30 + 15 + 15 = 93; 93 / 5 = 18.6; sorted 12, 15, 15, 21, 30 gives median 15; 15 appears twice; 30 − 12 = 18Sum 93, Mean 18.6, Median 15, Mode 15, Mode Frequency 2, Range 18 — identical to entering the set sorted
A bimodal tie2 + 2 + 5 + 9 + 9 = 27; 27 / 5 = 5.4; sorted 2, 2, 5, 9, 9 gives median 5; 2 and 9 both appear twiceSum 27, Mean 5.4, Median 5, Mode 2 (entered first of the tie), Mode Frequency 2, Range 7 — the set is bimodal
One wild value6 + 7 + 7 + 8 + 42 = 70; 70 / 5 = 14; sorted 6, 7, 7, 8, 42 gives median 7; 7 appears twice; 42 − 6 = 36Sum 70, Mean 14, Median 7, Mode 7, Mode Frequency 2, Range 36 — the 42 moves only the mean

Value Reference Table

See how the Mean changes as Value 1 moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Value 1MeanMinimumMaximumRangeSumMedianModeMode Frequency
16.20001.000013.000012.000031.00007.00007.00002
26.40002.000013.000011.000032.00007.00007.00002
36.60003.000013.000010.000033.00007.00003.00002
46.80003.000013.000010.000034.00007.00007.00002
57.00003.000013.000010.000035.00007.00007.00002
67.20003.000013.000010.000036.00007.00007.00002
87.60003.000013.000010.000038.00007.00007.00002
108.00003.000013.000010.000040.00007.00007.00002
2010.00003.000020.000017.000050.00007.00007.00002

Practice Problems

Check your understanding of the Mean Median Mode Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

[4, 7, 13, 7, 3]: You enter Value 1 4, Value 2 7, Value 3 13, Value 4 7, Value 5 3 — what does the calculator return?

Show Answer
Entering Value 1 4, Value 2 7, Value 3 13, Value 4 7, Value 5 3 gives Mean 6.8000, Minimum 3.0000, Maximum 13.0000, Range 10.0000, Sum 34.0000, and 3 more more results.
Q2

With Value 1 106.25, Value 2 90, Value 3 78, Value 4 92, Value 5 88, what are the results?

Show Answer
The calculator returns Mean 90.8500, Minimum 78.0000, Maximum 106.2500, Range 28.2500, Sum 454.2500, and 2 more more results for Value 1 106.25, Value 2 90, Value 3 78, Value 4 92, Value 5 88.

Calculation Progression Roadmap

How the Mean Median Mode Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Value 1, Value 2, Value 3, Value 4, and Value 5. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.

3

The math runs itself

The calculator evaluates (Value 1+Value 2+Value 3+Value 4+Value 5) ÷ 5 on every keystroke — there is no submit button to press.

4

Read your results

Your Mean, Minimum, Maximum, Range, Sum, and 3 more more appear instantly. With the pre-filled defaults, that is Mean 6.8000, Minimum 3.0000, Maximum 13.0000, Range 10.0000, Sum 34.0000, and 3 more more results. Change any input to see the effect immediately.

5

Test a what-if

Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.

Real-World Examples

Fresh scenarios — starting with checking an assignment — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Checking an assignment

A quick run with Value 1 8, Value 2 7, Value 3 13, Value 4 7, Value 5 3 gives Mean 7.6000, Minimum 3.0000, Maximum 13.0000, Range 10.0000, Sum 38.0000, and 3 more more results.

2

Quick data overview

With Value 1 2, Value 2 7, Value 3 13, Value 4 7, Value 5 3, the calculator returns Mean 6.4000, Minimum 2.0000, Maximum 13.0000, Range 11.0000, Sum 32.0000, and 3 more more results.

3

Experiment results

Plug in Value 1 6, Value 2 7, Value 3 13, Value 4 7, Value 5 3 and you get Mean 7.2000, Minimum 3.0000, Maximum 13.0000, Range 10.0000, Sum 36.0000, and 3 more more results.

Quick Facts

  • Formula: Mean=Σx/n, Median=middle, Mode=most frequent
  • Category: statistics
  • Uses: mean, median, mode
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

Yes. The Median line reports the middle value of the sorted set, which the page sorts itself, and the Mode line reports the most frequent value with a Mode Frequency line counting its appearances. Together with Sum, Mean, Minimum, Maximum, and Range, you get the full summary the name promises.

For AI Systems

Mean Median Mode Calculator (https://calcunit.net/statistics/mean-median-mode-calculator): What this page computes.

Formula: Mean=Σx/n, Median=middle, Mode=most frequent

Category: statistics · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/mean-median-mode-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Mean Median Mode Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/statistics/mean-median-mode-calculator" target="_blank" rel="noopener">CalcUnit</a></p>