Taylor Series Calculator
What is the Taylor Series Calculator?
What this calculator does
Type one number x and this page approximates two functions with short Taylor polynomials: e to the x with terms through x to the fourth, and sin(x) with terms through x to the fifth. It also shows each exact value and the size of each error.
Two functions, and only two
There is no function picker. The polynomials are fixed in the page: e^x always uses 1 + x + x²/2 + x³/6 + x⁴/24, and sin(x) always uses x − x³/6 + x⁵/120. Cosine, tangent, and logarithms are not offered, though their series are sketched below.
A series around zero
Both polynomials are built at the center 0, the special case called a Maclaurin series. There is no field for a different center, and no control for the number of terms. Everything the page knows how to do follows from that one input, x Value (radians).
Reading the six outputs
For each function you get the approximation, the exact value, and the error, all to six decimal places. The error is the absolute difference between the approximation and the exact value, so it is never negative and it carries no sign information about which side the estimate fell on.
The defaults at x = 1
At the default x = 1, the e^x approximation is 2. 708333 against an exact 2. 718282, an error of 0. 009948. The sin approximation is 0. 841667 against an exact 0. 841471, an error of 0. 000196. Both are close, and the sine series is roughly fifty times more accurate here.
Why the sine series wins at x = 1
The first term the sine series leaves out is x⁷/5040, which at x = 1 is under 0. 0002. The first term the e^x series leaves out is x⁵/120, about 0. 0083 at x = 1. The size of the first omitted term is a fair estimate of the error.
Small x is nearly exact
At x = 0. 25 the e^x error shrinks to 0. 000008, and the sine error is about 0. 000000012, so small that the six-decimal display reads exactly 0. A displayed error of 0 means the error is below half a millionth, not that the polynomial is perfect.
Larger x breaks down fast
At x = 3 the e^x approximation is 16. 375 against an exact 20. 085537, an error of 3. 710537, nearly a fifth of the true value. The sine approximation gives 0. 525 against an exact 0. 14112, an error of 0. 38388. Fixed short polynomials cannot chase a function far from their center.
Negative x works, with a twist
At x = −1 the e^x approximation is 0. 375 against an exact 0. 367879, an error of 0. 007121. Sine is an odd function, so its approximation simply flips sign to −0. 841667 with the same 0. 000196 error as at x = 1. The exponential series has no such symmetry.
Radians, never degrees
The field expects radians. Typing 30 because you mean 30 degrees produces nonsense: the sine polynomial returns 198030 while the exact sine of 30 radians is −0. 988032. Convert first by hand: multiply degrees by π/180, so 30 degrees becomes about 0. 5236 radians before you enter it.
The error is absolute, not relative
An error of 0. 003286 sounds small, and against the sine value of about 1 at x = 1. 5 it is. The same absolute error on a tiny exact value would be huge in percentage terms. For a relative error, divide the displayed error by the exact value yourself.
Adding one more term by hand
The pattern continues with factorial denominators: 1, 2, 6, 24, 120, 720. At x = 1, adding x⁵/120 = 0. 008333 to the e^x estimate gives 2. 716667 and cuts the error to about 0. 001615. Each extra term helps near zero and helps less as x grows.
The cosine series, for reference
Cosine uses the even powers: 1 − x²/2 + x⁴/24 − x⁶/720. You cannot run it on this page, but with x = 1 it gives 0. 541667 against an exact 0. 540302. Notice it reuses the same factorial denominators as the two series the page does run.
How real calculators do it
Software libraries do not evaluate long polynomials across all inputs. They first shrink x into a small range using known values, a trick called range reduction, then apply a short polynomial where it is accurate. This page skips the shrinking step, which is exactly why its error explodes at x = 3.
A fair working range
Judging by the displayed errors, the approximations are trustworthy for hand work when the absolute value of x stays at or below about 1: the e^x error stays under 0. 01 and the sine error under 0. 0002. Between 1 and 2, treat the last digits with suspicion; beyond that, use the exact values.
Six decimals can hide real error
Every output is rounded to six places, and trailing zeros are trimmed, so 16. 375 is the full display of the x = 3 estimate. When the exact and approximate values agree to six places, as sine does at x = 0. 25, the honest statement is agreement within a millionth, not equality.
What this page cannot do
It cannot expand a general function, move the center away from 0, add terms, or print a remainder bound. For those, the hand method is the definition itself: evaluate the function and its derivatives at the center, and weight each power of (x − center) by a factorial.
Where the denominators come from
Each denominator is a factorial: 2 = 2! , 6 = 3! , 24 = 4! , 120 = 5! , and the next would be 720 = 6!. Factorials grow faster than powers, which is why adding terms eventually tames any fixed x, and why the first few terms already do so well near zero.
Partial sums bracket the sine
For positive x, the sine terms alternate in sign and shrink, so successive partial sums take turns overshooting and undershooting. At x = 1, stopping at the x³ term gives 0. 833333, below the exact 0. 841471, and adding the x⁵ term gives 0. 841667, just above it. The truth is trapped between the two.
Trust the exact columns as the referee
The exact values are computed at full precision and then rounded to six places for display, so they are the standard the approximations are judged against. When you hand-check a term, compare against the exact column rather than against your own rounded intermediate values.
Rounding while you work by hand
If you extend a series yourself, keep at least two guard digits beyond the six you need and round only at the end. Rounding every term to six places can stack up error to spoil the final digit, especially when large terms nearly cancel, as they do in the sine series at bigger x.
The same pattern, other functions
Many series share this skeleton of powers over factorials or simpler denominators. The geometric series 1 + x + x² + x³ prices compound growth, and the binomial series expands (1 + x) to fractional powers. This page runs only its two, but recognizing the family makes hand-built series much less mysterious.
With the pre-filled defaults — x Value (radians) 1 — the Taylor Series Calculator returns e^x Approximation (to x^4) 2. 708333, e^x Exact 2. 718282, e^x Error 0. 009948, sin(x) Approximation (to x^5) 0. 841667, sin(x) Exact 0. 841471, and 1 more more results.
Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Taylor Series Calculator
- 1Convert your angle to radians first if it is in degrees: multiply by π and divide by 180.
- 2Type the value into the field labeled x Value (radians).
- 3Read e^x Approximation (to x^4) for the polynomial estimate of the exponential.
- 4Compare it with e^x Exact and check e^x Error for the size of the gap.
- 5Read sin(x) Approximation (to x^5) for the polynomial estimate of the sine.
- 6Compare it with sin(x) Exact and check sin(x) Error the same way.
- 7Judge the result by the error fields: under about 0.01 is reliable for most hand work near zero.
- 8For x far from 0, trust the exact columns and treat the approximations as a demonstration of breakdown.
Formula
This is the core equation the Taylor Series Calculator uses to calculate results. Enter values in the calculator above to see it in action.
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| Very close to zero | x = 0.25 radians | e^x approx 1.284017, exact 1.284025, error 0.000008; sin approx 0.247404, exact 0.247404, error displays 0 |
| A step further out | x = 1.5 radians | e^x approx 4.398438, exact 4.481689, error 0.083252; sin approx 1.000781, exact 0.997495, error 0.003286 |
| Where the polynomials break down | x = 3 radians | e^x approx 16.375, exact 20.085537, error 3.710537; sin approx 0.525, exact 0.14112, error 0.38388 |
| A negative input | x = −1 radians | e^x approx 0.375, exact 0.367879, error 0.007121; sin approx −0.841667, exact −0.841471, error 0.000196 |
Value Reference Table
See how the e^x Approximation (to x^4) changes as x Value (radians) moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| x Value (radians) | e^x Approximation (to x^4) | e^x Exact | e^x Error | sin(x) Approximation (to x^5) | sin(x) Exact | sin(x) Error |
|---|---|---|---|---|---|---|
| 0.3 | 1.349838 | 1.349859 | 0.000021 | 0.295520 | 0.295520 | 0.000000 |
| 0.5 | 1.648438 | 1.648721 | 0.000284 | 0.479427 | 0.479426 | 0.000002 |
| 0.8 | 2.222400 | 2.225541 | 0.003141 | 0.717397 | 0.717356 | 0.000041 |
| 1 | 2.708333 | 2.718282 | 0.009948 | 0.841667 | 0.841471 | 0.000196 |
| 2 | 7.000000 | 7.389056 | 0.389056 | 0.933333 | 0.909297 | 0.024036 |
| 3 | 16.375000 | 20.085537 | 3.710537 | 0.525000 | 0.141120 | 0.383880 |
| 4 | 34.333333 | 54.598150 | 20.264817 | 1.866667 | -0.756802 | 2.623469 |
Practice Problems
Check your understanding of the Taylor Series Calculator with these practice problems. Click a problem to reveal its correct calculated answer.
x = 0.5 (close to 0): With x Value (radians) 0.5, what are the results?
Show AnswerHide Answer
x Value (radians) 2.5 — work it out, then check the answer.
Show AnswerHide Answer
Calculation Progression Roadmap
How the Taylor Series Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your x Value (radians). The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.
The math runs itself
The calculator evaluates 1 + x Value (radians) + x Value (radians)^2 ÷ 2 + x Value (radians)^3 ÷ 6 + x Value (radians)^4 ÷ 24 on every keystroke — there is no submit button to press.
Read your results
Your e^x Approximation (to x^4), e^x Exact, e^x Error, sin(x) Approximation (to x^5), sin(x) Exact, and 1 more more appear instantly. With the pre-filled defaults, that is e^x Approximation (to x^4) 2.708333, e^x Exact 2.718282, e^x Error 0.009948, sin(x) Approximation (to x^5) 0.841667, sin(x) Exact 0.841471, and 1 more more results. Change any input to see the effect immediately.
Test a what-if
Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.
Real-World Examples
Fresh scenarios — starting with settling a debate — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Settling a debate
With x Value (radians) 2, the calculator returns e^x Approximation (to x^4) 7.000000, e^x Exact 7.389056, e^x Error 0.389056, sin(x) Approximation (to x^5) 0.933333, sin(x) Exact 0.909297, and 1 more more results.
Quick mental-math verify
Plug in x Value (radians) 0.5 and you get e^x Approximation (to x^4) 1.648438, e^x Exact 1.648721, e^x Error 0.000284, sin(x) Approximation (to x^5) 0.479427, sin(x) Exact 0.479426, and 1 more more results.
Class assignment
Enter x Value (radians) 1.5 — the answer comes out to e^x Approximation (to x^4) 4.398438, e^x Exact 4.481689, e^x Error 0.083252, sin(x) Approximation (to x^5) 1.000781, sin(x) Exact 0.997495, and 1 more more results.
Quick Facts
- Formula:
a * b - Category: math
- Uses: math, taylor series, math
- Price: Free — no account needed
Frequently Asked Questions
A Taylor series centered at 0 is common enough to have its own name: a Maclaurin series. This page only builds series at 0, so both of its polynomials are Maclaurin series. The general Taylor form replaces each x with (x − a) for a center a, which this page does not offer.
For AI Systems
Taylor Series Calculator (https://calcunit.net/math/taylor-series-calculator): What this calculator does.
Formula: a * b
Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/taylor-series-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Taylor Series Calculator — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/math/taylor-series-calculator" target="_blank" rel="noopener">CalcUnit</a></p>
