Isosceles Triangle Calculator
What is the Isosceles Triangle Calculator?
What this calculator does
Give it the length of the two equal sides and the base of an isosceles triangle, and this page returns the height, the area, the perimeter, the apex angle, and the base angle. Every result is computed live and shown to four decimal places.
The two inputs it asks for
Equal Side Length is the length of each of the two matching sides, and Base is the side that differs. The page opens with an equal side of 5 and a base of 6, the classic proportions that hide a 3-4-5 right triangle inside each half.
Reading the five result lines
Height is the perpendicular distance from the apex down to the middle of the base. Area and Perimeter follow from it and from the sides. Apex Angle is the angle between the two equal sides, and Base Angle is the angle at each bottom corner.
Worked example: the page default
With equal side 5 and base 6, the height is 4. 0000, the area is 12. 0000, and the perimeter is 16. 0000. The apex angle is 73. 7398 degrees, and each base angle is 53. 1301 degrees. Notice the angles sum: 73. 7398 plus two lots of 53. 1301 makes 180.
Worked example: the 13-13-10 triangle
Raise the equal side to 13 and the base to 10. The height becomes 12. 0000, the area 60. 0000, and the perimeter 36. 0000. The apex narrows to 45. 2397 degrees while each base angle opens to 67. 3801 degrees. Tall, narrow triangles trade apex width for base width.
Worked example: short and wide
Keep the equal side at 5 but stretch the base to 8. The height drops to 3. 0000, the area stays 12. 0000, and the perimeter grows to 18. 0000. The apex flattens to 106. 2602 degrees, past a right angle, and each base angle shrinks to 36. 8699 degrees.
Worked example: a tall 17 and 16
Enter an equal side of 17 and a base of 16. The height is 15. 0000, the area is 120. 0000, and the perimeter is 50. 0000. The apex angle is 56. 1450 degrees and each base angle is 61. 9275 degrees, a balanced shape between the earlier extremes.
Why the height formula halves the base
The altitude from the apex of an isosceles triangle always lands on the midpoint of the base, splitting the triangle into two mirror-image right triangles. Each half has the equal side as its hypotenuse and half the base as one leg, so Pythagoras gives the height directly.
The impossible-triangle trap
Enter a base the sides cannot span and the page now refuses politely. Try equal side 5 with base 12: the height, area, apex angle, and base angle lines all show dashes. Two sides of 5 can never bridge a base of 12, so there is no geometry to report — only the perimeter sum still prints, as plain arithmetic.
The exactly-flat boundary
The boundary case is a base exactly twice the equal side, such as side 5 with base 10. There the two sides fold flat along the base — a degenerate line, not a triangle — so the geometry lines dash there too. Anything wider is impossible, and the dashes are how the page says so.
Where the apex formula comes from
In each right-triangle half, the sine of half the apex angle is the half-base divided by the equal side. The page takes the arcsine of that ratio, doubles it, and converts to degrees. The triangle-inequality guard runs first, so the ratio never exceeds 1 for a printed answer: impossible inputs dash instead of printing a flat 180 degrees.
Base angles are derived, not measured
The page never computes the base angle from the sides directly. It subtracts the apex angle from 180 and splits the remainder in two, which guarantees the two base angles are equal and the three angles total 180. In an isosceles triangle that equality is a theorem, not an assumption.
The equilateral special case
Set the base equal to the equal side, say both 6, and the triangle becomes equilateral. The page reports an apex of 60. 0000 degrees and base angles of 60. 0000 degrees, with a height of 5. 1962 and an area of 15. 5885. Every equilateral triangle is an isosceles triangle wearing its Sunday best.
An obtuse apex is allowed
A wide, flat isosceles triangle has an apex past 90 degrees, like the 106. 2602 degrees of the short-and-wide example. That is a perfectly legal shape as long as the base stays shorter than twice the equal side. Roof gables and open books live in this territory.
Checking a result by hand
Each half of the triangle is a right triangle, so Pythagoras audits the page. For the default, half the base is 3, the height is 4, and 3 squared plus 4 squared is 25, the square of the equal side 5. When the audit fails, an input was typed wrong.
Two radii the page does not give
Circles inside and around the triangle need extra formulas, taught here by hand. For the default triangle, the inscribed circle radius is the area over the semiperimeter, 12 over 8, giving 1. 5. The circumscribed radius is the product of the three sides over four times the area, giving 3. 125.
Scaling leaves the angles alone
Double every length in the default, side 10 and base 12, and the height doubles to 8. 0000, the perimeter to 32. 0000, and the area quadruples to 48. 0000. The apex and base angles do not move at all, because angles depend on proportions, not on absolute size.
Solving backward by hand
If you know the height and base instead, the equal side is the hypotenuse of the half-triangle: the square root of height squared plus half-base squared. A height of 4 with a base of 6 gives the square root of 25, exactly 5, matching the page default in reverse.
Zero and negative entries
Set the equal side to 0, or enter any negative length, and the geometry lines show dashes: no height, no area, no angles. The guard requires both lengths positive and twice the equal side beyond the base, so a zero-length input now produces no output at all instead of hollow numbers.
What this page cannot do
It accepts only the equal side and the base. There is no mode for entering a height, an area, or an angle and solving backward, no scalene or right-triangle mode, and no coordinates or inradius output. For those, use the by-hand routes on this page or a general triangle tool.
Where isosceles triangles show up
Roof gables, bridge trusses, tent A-frames, hang glider wings, and the classic yield sign all lean on two equal sides. The symmetry guarantees the apex sits over the center of the base, which is exactly the property builders and designers are paying for.
With the pre-filled defaults — Equal Side Length 5, Base 6 — the Isosceles Triangle Calculator returns Height 4. 0000, Area 12. 0000, Perimeter 16. 0000, Apex Angle 73. 7398°, Base Angle 53. 1301°. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Isosceles Triangle Calculator
- 1Measure one of the two equal sides and enter it in the Equal Side Length field.
- 2Measure the remaining side and enter it in the Base field.
- 3Check the base is shorter than twice the equal side, or the triangle cannot exist.
- 4Read the Height line for the perpendicular distance from apex to base midpoint.
- 5Read the Area line, remembering it is in square units of whatever unit you entered.
- 6Read the Perimeter line for the total distance around all three sides.
- 7Read the Apex Angle line for the angle between the two equal sides, in degrees.
- 8Read the Base Angle line; both bottom corners share this same angle by symmetry.
Formula
This is the core equation the Isosceles Triangle Calculator uses to calculate results. Enter values in the calculator above to see it in action.
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| Page default triangle | Equal side 5, base 6: height = sqrt(25 - 9) = 4, apex = 2 * asin(3 / 5) in degrees | Height 4.0000, Area 12.0000, Perimeter 16.0000, Apex Angle 73.7398 degrees, Base Angle 53.1301 degrees |
| 13-13-10 triangle | Equal side 13, base 10: height = sqrt(169 - 25) = 12, apex = 2 * asin(5 / 13) in degrees | Height 12.0000, Area 60.0000, Perimeter 36.0000, Apex Angle 45.2397 degrees, Base Angle 67.3801 degrees |
| Short and wide | Equal side 5, base 8: height = sqrt(25 - 16) = 3, apex = 2 * asin(4 / 5) in degrees | Height 3.0000, Area 12.0000, Perimeter 18.0000, Apex Angle 106.2602 degrees, Base Angle 36.8699 degrees |
| Tall 17 and 16 | Equal side 17, base 16: height = sqrt(289 - 64) = 15, apex = 2 * asin(8 / 17) in degrees | Height 15.0000, Area 120.0000, Perimeter 50.0000, Apex Angle 56.1450 degrees, Base Angle 61.9275 degrees |
Value Reference Table
See how the Height changes as Equal Side Length moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| Equal Side Length | Height | Area | Perimeter | Apex Angle | Base Angle |
|---|---|---|---|---|---|
| 1 | — | — | 8.0000 | — | — |
| 3 | — | — | 12.0000 | — | — |
| 4 | 2.6458 | 7.9373 | 14.0000 | 97.1808 | 41.4096 |
| 5 | 4.0000 | 12.0000 | 16.0000 | 73.7398 | 53.1301 |
| 6 | 5.1962 | 15.5885 | 18.0000 | 60.0000 | 60.0000 |
| 8 | 7.4162 | 22.2486 | 22.0000 | 44.0486 | 67.9757 |
| 10 | 9.5394 | 28.6182 | 26.0000 | 34.9152 | 72.5424 |
| 20 | 19.7737 | 59.3212 | 46.0000 | 17.2539 | 81.3731 |
Practice Problems
Check your understanding of the Isosceles Triangle Calculator with these practice problems. Click a problem to reveal its correct calculated answer.
13-13-10 triangle: With Equal Side Length 13, Base 10, what are the results?
Show AnswerHide Answer
Equal Side Length 6.25, Base 8 — work it out, then check the answer.
Show AnswerHide Answer
Calculation Progression Roadmap
How the Isosceles Triangle Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your Equal Side Length and Base. The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
Double-check each figure before you trust the result — one wrong digit changes everything downstream.
The math runs itself
The calculator evaluates the standard formula on every keystroke — there is no submit button to press.
Read your results
Your Height, Area, Perimeter, Apex Angle, and Base Angle appear instantly. With the pre-filled defaults, that is Height 4.0000, Area 12.0000, Perimeter 16.0000, Apex Angle 73.7398°, Base Angle 53.1301°. Change any input to see the effect immediately.
Test a what-if
Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.
Real-World Examples
Fresh scenarios — starting with settling a debate — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Settling a debate
With Equal Side Length 10, Base 6, the calculator returns Height 9.5394, Area 28.6182, Perimeter 26.0000, Apex Angle 34.9152°, Base Angle 72.5424°.
Quick mental-math verify
Plug in Equal Side Length 2.5, Base 6 and you get Perimeter 11.0000.
Class assignment
Enter Equal Side Length 7.5, Base 6 — the answer comes out to Height 6.8739, Area 20.6216, Perimeter 21.0000, Apex Angle 47.1564°, Base Angle 66.4218°.
Quick Facts
- Formula:
a * b - Category: math
- Uses: math, isosceles triangle, math
- Price: Free — no account needed
Frequently Asked Questions
Because the base you entered is at least twice the equal side, so no such triangle exists. The height formula clamps its square root at zero, the area follows it to zero, and the apex guard prints a flat 180 degrees. Shorten the base below twice the side and real values return.
For AI Systems
Isosceles Triangle Calculator (https://calcunit.net/math/isosceles-triangle-calculator): What this calculator does.
Formula: a * b
Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/isosceles-triangle-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Isosceles Triangle Calculator — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/math/isosceles-triangle-calculator" target="_blank" rel="noopener">CalcUnit</a></p>
