CalcUnit Logo

Geometry Calculator

What is the Geometry Calculator?

What this calculator does

Enter four measurements and this page answers six questions: Square Area and Square Perimeter from one side, Circle Area and Circle Circumference from one radius, and Triangle Area and Rectangle Area from a shared base and height. It is a starter geometry panel, not a full geometry suite, and later sections mark where its reach ends.

One shared set of inputs

The four input fields feed every formula together. Square Side Length and Circle Radius each serve a single shape, but Base Length and Height are shared: the same pair produces both the Triangle Area and the Rectangle Area. Changing the height therefore moves two results at once, which surprises people the first time.

The four inputs it asks for

Square Side Length is one edge of the square; it opens at 5. Circle Radius runs from center to rim; it opens at 3. Base Length opens at 8 and Height at 4, and those two serve the triangle and rectangle. There is no unit selector, so all four must share one unit.

Reading the six result lines

Square Area and Square Perimeter describe the square. Circle Area and Circle Circumference describe the circle. Triangle Area uses the base and height at half strength, and Rectangle Area (base x height) uses the same pair at full strength. Every line is shown to four decimal places.

Worked example: the page default

With side 5, radius 3, base 8, and height 4, the page reports Square Area 25. 0000, Square Perimeter 20. 0000, Circle Area 28. 2743, Circle Circumference 18. 8496, Triangle Area 16. 0000, and Rectangle Area 32. 0000. Notice the triangle takes exactly half the rectangle because both use the same base and height.

Worked example: a small set

Enter side 2. 5, radius 1, base 6, and height 3. The results read Square Area 6. 2500, Square Perimeter 10. 0000, Circle Area 3. 1416, Circle Circumference 6. 2832, Triangle Area 9. 0000, and Rectangle Area 18. 0000. A radius of 1 makes the circle area equal to pi itself, a handy memory anchor.

Worked example: a large set

Enter side 10, radius 7, base 5, and height 5. The page reports Square Area 100. 0000, Square Perimeter 40. 0000, Circle Area 153. 9380, Circle Circumference 43. 9823, Triangle Area 12. 5000, and Rectangle Area 25. 0000. Radius 7 is friendly because 22 over 7 approximates pi enough to check the circle lines mentally.

Worked example: tiles and a rug

Enter side 12, radius 5, base 10, height 6, for a tile layout beside a round rug. Square Area reads 144. 0000, Square Perimeter 48. 0000, Circle Area 78. 5398, Circle Circumference 31. 4159, Triangle Area 30. 0000, Rectangle Area 60. 0000. In feet, those are square feet for areas and feet for edges.

The square formulas

Square Area is the side multiplied by itself, and Square Perimeter is four times the side. Doubling the side doubles the perimeter but quadruples the area, because both dimensions grow at once. That mismatch is why a modestly bigger patio can need a dramatically bigger materials budget.

The circle formulas

Circle Area is pi times the radius squared, and Circle Circumference is 2 times pi times the radius. Both take the radius, not the diameter: if you measured across the whole circle, halve that number first. With radius 5 the area is 78. 5398; typing a diameter in its place would quadruple that area.

The triangle formula

Triangle Area is one half of Base Length times Height. The Height must be the perpendicular distance from the base to the opposite corner, measured at a right angle. A slanted side length is not the height, and using one overstates the area whenever the triangle leans.

The rectangle formula and its twin result

Rectangle Area (base x height) is Base Length times Height with no halving. Because the triangle line halves the identical product, the Rectangle Area on this page is always exactly double the Triangle Area. If your two results ever break that relationship, one of the shared inputs was edited between readings.

The missing perimeters, honestly

There is no Rectangle Perimeter line, but you can get it by hand: twice the base plus twice the height: for the default pair, 2 times 8 plus 2 times 4, giving 24. A triangle perimeter cannot be recovered from base and height at all, because many side lengths fit the same base and height.

Units must match

The page never asks what unit you are using, and it never converts. Measure everything in inches and the areas come out in square inches and the perimeter and circumference in inches. Mixing a radius in feet with a base in inches produces numbers that are formally calculated and practically meaningless.

Negative entries produce nonsense politely

Lengths are positive, and the formulas only partly protect you. A side of -5 still shows Square Area 25. 0000 but Square Perimeter -20. 0000, and a radius of -3 shows Circle Area 28. 2743 with Circle Circumference -18. 8496. A negative perimeter or circumference in your results means a sign slipped into an input.

If you only know the diameter

School and shop problems often give the diameter instead of the radius. Halve it before typing: a 10-inch round pizza has radius 5, so the Circle Radius field takes 5 and the Circle Area line returns 78. 5398 square inches. The same halving works for tree trunks, pipes, and pans.

Checking the circle lines by hand

Use 3. 14 for pi and redo the two circle formulas; your figures land slightly below the page, which carries pi at full precision. For radius 3, the shortcut gives 28. 26 against the page's 28. 2743. A bracket also helps: the area sits between 3 and 3. 2 times the radius squared.

Where these four shapes cover daily life

Floor tiles and square patios use the square lines. Round rugs, pizzas, and garden beds use the circle lines. Triangular sails, ramps, and gable ends use the triangle line, and rectangular rooms, screens, and sheets of plywood use the rectangle line. A surprising share of measuring jobs is only these four shapes combined.

What this calculator does not do

Despite the name, it covers four shapes and six formulas only. There are no trapezoids, parallelograms, ellipses, or sectors, no volumes or surface areas, no angles, no Pythagorean theorem, and no solving backwards from an area to a missing side. Each of those jobs belongs on its own dedicated page with the right inputs.

Rounding on the results

Every result is shown to four decimal places. Whole-number answers arrive padded, like 25. 0000, while the circle lines show the rounding at work: pi times 9 is 28. 27433388 before trimming, displayed as 28. 2743. For cutting or buying materials, round areas up in your plans rather than trusting the fourth decimal.

With the pre-filled defaults — Square Side Length 5, Circle Radius 3, Base Length 8, Height 4 — the Geometry Calculator returns Square Area 25. 0000, Square Perimeter 20. 0000, Circle Area 28. 2743, Circle Circumference 18. 8496, Triangle Area 16. 0000, and 1 more more results.

Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Geometry Calculator

  1. 1Enter the Square Side Length for one edge of the square.
  2. 2Enter the Circle Radius, halving the diameter first if that is what you measured.
  3. 3Enter the Base Length shared by the triangle and the rectangle.
  4. 4Enter the Height, the perpendicular height paired with that base.
  5. 5Read Square Area and Square Perimeter for the square.
  6. 6Read Circle Area and Circle Circumference for the circle.
  7. 7Read Triangle Area, remembering it halves the shared base times height.
  8. 8Read Rectangle Area (base x height), and add twice base plus twice height by hand if you need its perimeter.

Formula

a * b

This is the core equation the Geometry Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
Page default setSquare Side Length 5, Circle Radius 3, Base Length 8, Height 4: square 5^2 and 4 * 5, circle pi * 3^2 and 2 * pi * 3, triangle 0.5 * 8 * 4, rectangle 8 * 4Square Area 25.0000, Square Perimeter 20.0000, Circle Area 28.2743, Circle Circumference 18.8496, Triangle Area 16.0000, Rectangle Area 32.0000
Small setSquare Side Length 2.5, Circle Radius 1, Base Length 6, Height 3: square 2.5^2 and 4 * 2.5, circle pi * 1^2 and 2 * pi * 1, triangle 0.5 * 6 * 3, rectangle 6 * 3Square Area 6.2500, Square Perimeter 10.0000, Circle Area 3.1416, Circle Circumference 6.2832, Triangle Area 9.0000, Rectangle Area 18.0000
Large setSquare Side Length 10, Circle Radius 7, Base Length 5, Height 5: square 10^2 and 4 * 10, circle pi * 7^2 and 2 * pi * 7, triangle 0.5 * 5 * 5, rectangle 5 * 5Square Area 100.0000, Square Perimeter 40.0000, Circle Area 153.9380, Circle Circumference 43.9823, Triangle Area 12.5000, Rectangle Area 25.0000
Tiles and a round rugSquare Side Length 12, Circle Radius 5, Base Length 10, Height 6: square 12^2 and 4 * 12, circle pi * 5^2 and 2 * pi * 5, triangle 0.5 * 10 * 6, rectangle 10 * 6Square Area 144.0000, Square Perimeter 48.0000, Circle Area 78.5398, Circle Circumference 31.4159, Triangle Area 30.0000, Rectangle Area 60.0000

Value Reference Table

See how the Square Area changes as Square Side Length moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Square Side LengthSquare AreaSquare PerimeterCircle AreaCircle CircumferenceTriangle AreaRectangle Area (base x height)
11.00004.000028.274318.849616.000032.0000
39.000012.000028.274318.849616.000032.0000
416.000016.000028.274318.849616.000032.0000
525.000020.000028.274318.849616.000032.0000
636.000024.000028.274318.849616.000032.0000
864.000032.000028.274318.849616.000032.0000
10100.000040.000028.274318.849616.000032.0000
20400.000080.000028.274318.849616.000032.0000

Practice Problems

Check your understanding of the Geometry Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Small set: Plug in Square Side Length 2.5, Circle Radius 1, Base Length 6, Height 3. What is the answer?

Show Answer
The calculator returns Square Area 6.2500, Square Perimeter 10.0000, Circle Area 3.1416, Circle Circumference 6.2832, Triangle Area 9.0000, and 1 more more results for Square Side Length 2.5, Circle Radius 1, Base Length 6, Height 3.
Q2

Given Square Side Length 12.5, Circle Radius 7, Base Length 5, Height 5, what does it come out to?

Show Answer
With Square Side Length 12.5, Circle Radius 7, Base Length 5, Height 5, the results are Square Area 156.2500, Square Perimeter 50.0000, Circle Area 153.9380, Circle Circumference 43.9823, Triangle Area 12.5000, and 1 more more results.

Calculation Progression Roadmap

How the Geometry Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Square Side Length, Circle Radius, Base Length, and Height. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

Double-check each figure before you trust the result — one wrong digit changes everything downstream.

3

The math runs itself

The calculator evaluates Square Side Length ^ 2 on every keystroke — there is no submit button to press.

4

Read your results

Your Square Area, Square Perimeter, Circle Area, Circle Circumference, Triangle Area, and 1 more more appear instantly. With the pre-filled defaults, that is Square Area 25.0000, Square Perimeter 20.0000, Circle Area 28.2743, Circle Circumference 18.8496, Triangle Area 16.0000, and 1 more more results. Change any input to see the effect immediately.

5

Test a what-if

Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.

Real-World Examples

Fresh scenarios — starting with class assignment — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Class assignment

Enter Square Side Length 10, Circle Radius 3, Base Length 8, Height 4 — the answer comes out to Square Area 100.0000, Square Perimeter 40.0000, Circle Area 28.2743, Circle Circumference 18.8496, Triangle Area 16.0000, and 1 more more results.

2

Homework check

For Square Side Length 2.5, Circle Radius 3, Base Length 8, Height 4, expect Square Area 6.2500, Square Perimeter 10.0000, Circle Area 28.2743, Circle Circumference 18.8496, Triangle Area 16.0000, and 1 more more results.

3

Double-checking a spreadsheet

A quick run with Square Side Length 7.5, Circle Radius 3, Base Length 8, Height 4 gives Square Area 56.2500, Square Perimeter 30.0000, Circle Area 28.2743, Circle Circumference 18.8496, Triangle Area 16.0000, and 1 more more results.

Quick Facts

  • Formula: a * b
  • Category: math
  • Uses: math, geometry, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

Four shapes and six formulas: a square's area and perimeter, a circle's area and circumference, a triangle's area, and a rectangle's area. Despite the broad name, there are no trapezoids, ellipses, or other shapes, and no volumes. It is a quick panel for the most common flat shapes rather than a complete geometry toolkit.

For AI Systems

Geometry Calculator (https://calcunit.net/math/geometry-calculator): What this calculator does.

Formula: a * b

Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/geometry-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Geometry Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/math/geometry-calculator" target="_blank" rel="noopener">CalcUnit</a></p>