Geometric Sequence Calculator
What is the Geometric Sequence Calculator?
What this calculator does
A geometric sequence is a list of numbers where every term is the previous term multiplied by one fixed ratio. Give this page the First Term (a1), the Common Ratio (r), and the Number of Terms (n), and it returns the Nth Term (an) and the Sum of N Terms (Sn), plus a chart.
How it differs from an arithmetic sequence
An arithmetic sequence grows by adding the same difference at every step, so its terms march in a straight line. A geometric sequence multiplies instead, so its terms curve: they explode upward when the ratio is above one and collapse toward zero when the ratio sits between zero and one.
The three inputs it asks for
First Term (a1) is the opening value of the list. Common Ratio (r) is the multiplier applied at every step, and it may be decimal, fractional in decimal form, or negative. Number of Terms (n) counts whole positions starting at 1. The page opens with 1, 2, and 5 filled in.
Reading the two result lines
Nth Term (an) is the single value sitting at position n. Sum of N Terms (Sn) is every term from position 1 through position n added together. Both lines are shown to four decimal places. One line names a destination; the other totals the whole journey.
Why the exponent is n minus 1
The first term is the starting point, so no multiplication has happened yet at position 1. Each later position applies the ratio one more time, which means position n is reached after exactly n minus 1 multiplications. Testing the formula at n equal to 1 returns the first term itself, confirming the count.
Worked example: the page default
With First Term (a1) 1, Common Ratio (r) 2, and Number of Terms (n) 5, the list is 1, 2, 4, 8, 16. The page reports Nth Term (an) 16. 0000 and Sum of N Terms (Sn) 31. 0000, since 1 plus 2 plus 4 plus 8 plus 16 adds to 31 exactly.
Worked example: powers of three
Enter First Term (a1) 3, Common Ratio (r) 3, and Number of Terms (n) 6 and the list runs 3, 9, 27, 81, 243, 729. The Nth Term (an) line reads 729. 0000 and the Sum of N Terms (Sn) line reads 1092. 0000. Tripling grows faster than most people guess.
Worked example: a halving process
Enter First Term (a1) 100, Common Ratio (r) 0. 5, and Number of Terms (n) 8, the pattern behind half-life decay. The terms fall 100, 50, 25, down to 0. 78125 at position 8. The page shows Nth Term (an) 0. 7813 after rounding, and Sum of N Terms (Sn) 199. 2188.
Worked example: quartering down
Enter First Term (a1) 256, Common Ratio (r) 0. 25, and Number of Terms (n) 5. The terms are 256, 64, 16, 4, 1: Nth Term (an) reads 1. 0000 and Sum of N Terms (Sn) reads 341. 0000. Dividing by four each step lands on one, since 256 is four to the fourth power.
The special case when r equals 1
A ratio of 1 makes every term identical, and the general sum formula would divide by zero, so the page switches to a guard: Sum of N Terms becomes a1 times n. With First Term 7, Common Ratio 1, and Number of Terms 12, an reads 7. 0000 and Sn reads 84. 0000.
Negative ratios alternate in sign
Enter First Term (a1) 5, Common Ratio (r) -2, and Number of Terms (n) 6. The list zigzags 5, -10, 20, -40, 80, -160, so Nth Term (an) reads -160. 0000 and Sum of N Terms (Sn) reads -105. 0000. Each multiplication flips the sign, which is why the running total can stay negative overall.
Ratios below one approach a limit
When the ratio sits between zero and one, the terms shrink toward zero and the sum approaches a ceiling: a1 divided by (1 minus r). The halving example tends toward 200, and its eight-term sum, 199. 2188, is already close. This page sums only finite runs; the limit is a by-hand extra.
Growth ratios above one explode
Enter First Term (a1) 1000, Common Ratio (r) 1. 05, and Number of Terms (n) 10 to mimic five percent growth per period. Nth Term (an) reads 1551. 3282 and Sum of N Terms (Sn) reads 12577. 8925. This is the same mathematics behind compound growth, where the ratio is one plus the rate.
A ratio of zero collapses the list
With Common Ratio (r) 0, every term after the first is zero, since anything times zero stays zero. Enter First Term 9, Common Ratio 0, and Number of Terms 4 and it reports Nth Term (an) 0. 0000 with Sum of N Terms (Sn) 9. 0000: the first term is the entire sum.
What the chart shows
Below the results, the chart titled Term Value vs Position n plots the term value at each position from 1 through 10 using your first term and ratio. A ratio above one bends the points upward, a ratio below one flattens them toward zero, and a negative ratio makes them zigzag across the axis.
Finding the ratio from two terms by hand
For consecutive terms, the ratio is the later term divided by the earlier one. For terms some positions apart, divide them and take the matching root: if term one is 4 and term four is 32, r cubed equals 8, so r equals 2. The list 4, 8, 16, 32 confirms it.
Finding n for a target term by hand
Divide the target by a1, then ask what power of the ratio gives that quotient; logarithms answer directly: n equals log of (an over a1) divided by log of r, plus 1. For the powers-of-three example, 729 over 3 is 243, which is 3 to the fifth: n is 6.
Where geometric sequences show up
Compound growth and depreciation run on this pattern, because each period multiplies the balance. Radioactive half-life and drug clearance halve the amount on a fixed schedule. A bouncing ball rises to a fixed fraction of its previous height each bounce, so bounce heights form a shrinking geometric list.
Decimal ratios and the four-decimal display
Results are rounded to four decimal places, and the halving example shows what that means: the exact eighth term is 0. 78125, and it displays 0. 7813. For money or measurement work, treat the fourth decimal as the precision limit and keep more digits in your notes when a chain of calculations follows.
What this calculator does not do
The page prints no term-by-term list as text; only the chart shows the opening positions. It cannot solve backwards for the ratio or for n, and it never sums infinitely many terms. A decimal n returns a formula value, but real sequences have whole positions, so treat fractional positions as meaningless.
Checking a result by hand
Multiply the first term by the ratio repeatedly and compare a few terms with the chart. For small n, add the terms directly and match the Sum of N Terms line. One quick identity also helps: the sum minus r times the sum should equal a1 times (1 minus r to the n).
Common mistakes to avoid
Using n instead of n minus 1 in the exponent overshoots by one whole multiplication. Entering five percent growth as ratio 5 instead of 1. 05 inflates everything wildly. Expecting the plain sum formula to work at ratio 1 misses the guard the page applies, where the sum is simply a1 times n.
With the pre-filled defaults — First Term (a1) 1, Common Ratio (r) 2, Number of Terms (n) 5 — the Geometric Sequence Calculator returns Nth Term (an) 16. 0000, Sum of N Terms (Sn) 31. 0000. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Geometric Sequence Calculator
- 1Enter the First Term (a1), the opening value of the sequence.
- 2Enter the Common Ratio (r), the multiplier applied at every step.
- 3Enter the Number of Terms (n), counting whole positions from 1.
- 4Read the Nth Term (an) line for the value at position n.
- 5Read the Sum of N Terms (Sn) line for the total of the first n terms.
- 6Check the chart titled Term Value vs Position n for positions 1 through 10.
- 7Try a Common Ratio between 0 and 1 to watch the terms shrink toward a limit.
- 8For a Common Ratio of exactly 1, remember the sum is just the first term times n.
Formula
This is the core equation the Geometric Sequence Calculator uses to calculate results. Enter values in the calculator above to see it in action.
See the full step-by-step formula guide with worked examples →
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| Page default: doubling | First Term (a1) 1, Common Ratio (r) 2, Number of Terms (n) 5: an 1 * 2^4, Sn 1 * (1 - 2^5) / (1 - 2) | Nth Term (an) 16.0000, Sum of N Terms (Sn) 31.0000 |
| Half-life decay | First Term (a1) 100, Common Ratio (r) 0.5, Number of Terms (n) 8: an 100 * 0.5^7, Sn 100 * (1 - 0.5^8) / (1 - 0.5) | Nth Term (an) 0.7813, Sum of N Terms (Sn) 199.2188 |
| Powers of three | First Term (a1) 3, Common Ratio (r) 3, Number of Terms (n) 6: an 3 * 3^5, Sn 3 * (1 - 3^6) / (1 - 3) | Nth Term (an) 729.0000, Sum of N Terms (Sn) 1092.0000 |
| Alternating signs | First Term (a1) 5, Common Ratio (r) -2, Number of Terms (n) 6: an 5 * (-2)^5, Sn 5 * (1 - (-2)^6) / (1 - (-2)) | Nth Term (an) -160.0000, Sum of N Terms (Sn) -105.0000 |
Value Reference Table
See how the Nth Term (an) changes as First Term (a1) moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| First Term (a1) | Nth Term (an) | Sum of N Terms (Sn) |
|---|---|---|
| 0.3 | 4.8000 | 9.3000 |
| 0.5 | 8.0000 | 15.5000 |
| 0.8 | 12.8000 | 24.8000 |
| 1 | 16.0000 | 31.0000 |
| 2 | 32.0000 | 62.0000 |
| 3 | 48.0000 | 93.0000 |
| 4 | 64.0000 | 124.0000 |
Practice Problems
Check your understanding of the Geometric Sequence Calculator with these practice problems. Click a problem to reveal its correct calculated answer.
Doubling sequence (1, 2, 4...) up to 5th term: Plug in First Term (a1) 1, Common Ratio (r) 2, Number of Terms (n) 5. What is the answer?
Show AnswerHide Answer
Given First Term (a1) 125, Common Ratio (r) 0.5, Number of Terms (n) 8, what does it come out to?
Show AnswerHide Answer
Calculation Progression Roadmap
How the Geometric Sequence Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your First Term (a1), Common Ratio (r), and Number of Terms (n). The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.
The math runs itself
The calculator evaluates First Term (a1) × Common Ratio (r)^(Number of Terms (n) - 1) on every keystroke — there is no submit button to press.
Read your results
Your Nth Term (an) and Sum of N Terms (Sn) appear instantly. With the pre-filled defaults, that is Nth Term (an) 16.0000, Sum of N Terms (Sn) 31.0000. Change any input to see the effect immediately.
Test a what-if
Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.
Real-World Examples
Fresh scenarios — starting with class assignment — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Class assignment
Enter First Term (a1) 2, Common Ratio (r) 2, Number of Terms (n) 5 — the answer comes out to Nth Term (an) 32.0000, Sum of N Terms (Sn) 62.0000.
Homework check
For First Term (a1) 0.5, Common Ratio (r) 2, Number of Terms (n) 5, expect Nth Term (an) 8.0000, Sum of N Terms (Sn) 15.5000.
Double-checking a spreadsheet
A quick run with First Term (a1) 1.5, Common Ratio (r) 2, Number of Terms (n) 5 gives Nth Term (an) 24.0000, Sum of N Terms (Sn) 46.5000.
Quick Facts
- Formula:
aₙ = a₁ × rⁿ⁻¹ - Category: math
- Uses: geometric sequence, series, math
- Price: Free — no account needed
Frequently Asked Questions
It is an ordered list of numbers where each term is the previous term multiplied by one fixed value called the common ratio. Doubling gives 1, 2, 4, 8, and halving gives 100, 50, 25. Because the multiplier never changes, any term and any running total follow directly from the first term, the ratio, and the position.
For AI Systems
Geometric Sequence Calculator (https://calcunit.net/math/geometric-sequence): What this calculator does.
Formula: aₙ = a₁ × rⁿ⁻¹
Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/geometric-sequence/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Geometric Sequence Calculator — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/math/geometric-sequence" target="_blank" rel="noopener">CalcUnit</a></p>
