Field Strength Calculator
What is the Field Strength Calculator?
What this calculator does
Give it a source charge, a distance, and a test charge, and this page returns three numbers: the electric field strength at that distance, the force the test charge would feel, and the electric potential. It models one point charge sitting in empty space.
One field only: the electric field
Be clear about the scope. This page covers the electric field of a single point charge and nothing else. It does not compute magnetic fields, gravitational fields, or the field between charged plates. If your problem is not one point charge, this is the wrong tool.
The constant baked into every line
Every result uses Coulomb's constant fixed at 8. 99 times 10 to the 9th power. The accepted measured value is 8. 987551787 times 10 to the 9th, so the rounded constant makes every answer about 0. 03 percent too large. That gap is invisible in classwork and most engineering estimates.
The three inputs it asks for
Source Charge Q is the charge creating the field, in coulombs. Distance from Charge is the straight-line gap in meters. Test Charge q is the small charge you imagine placing at that distance. The page opens with Q at 0. 000001 coulombs, distance 0. 5 meters, test charge 0. 000000001.
Reading the three result lines
Electric Field Strength is printed in newtons per coulomb to four decimal places. Force on Test Charge is printed in newtons to six decimal places. Electric Potential is printed in volts to four decimal places. Trailing zeros are trimmed, so whole numbers show plainly.
Worked example: the page default
Enter Source Charge Q as 0. 000001, Distance from Charge as 0. 5, and Test Charge q as 0. 000000001. The field is 8. 99 times 10 to the 9th, times 0. 000001, divided by 0. 25, giving 35,960 newtons per coulomb. Force reads 0. 000036 newtons and potential 17,980 volts.
Worked example: larger charge, closer in
Enter Q as 0. 000002, distance as 0. 25 meters, and test charge as 0. 000000002. Halving the distance quarters the divisor, so the field jumps to 287,680 newtons per coulomb. The Force on Test Charge reads 0. 000575 newtons, and the Electric Potential reads 71,920 volts.
Worked example: small charge, far away
Enter Q as 0. 0000005, distance as 2 meters, and test charge as 0. 000000001. The field falls to 1,123. 75 newtons per coulomb and the potential to 2,247. 5 volts. The force is really about 0. 00000112 newtons, but the six-place display rounds it to 0. 000001.
Worked example: a negative source charge
Enter Q as negative 0. 000003, distance as 0. 3 meters, and test charge as 0. 000000005. Every result turns negative: field negative 299,666. 6667 newtons per coulomb, force negative 0. 001498 newtons, potential negative 89,900 volts. The minus sign is information, not an error. It marks direction and attraction.
Why distance hits the field twice as hard
Field strength divides by distance squared, while potential divides by distance only. Double the distance and the field drops to one quarter, but the potential only halves. Check with Q at 0. 000001 and distance 1 meter: field and potential both read 8,990, their shared starting point.
Field strength versus potential
The field is a push measured per unit of charge, and it has a direction. Potential is stored electric energy per unit of charge, a single signed number with no direction. For a point charge they stay linked: divide the potential by the distance and you recover the field.
The force line follows the test charge
Force is simply field strength times test charge, so doubling the test charge doubles the force and never touches the field. Flip the test charge negative and the force flips sign, because opposite charges attract. The field belongs to the source; the force belongs to the visitor.
When the force line reads almost nothing
Force is shown to six decimal places of a newton, and real electrostatic forces are often far smaller than that. A true force of 0. 00000112 newtons displays as 0. 000001, and anything under half a millionth of a newton displays as zero. That is a display limit, not physics.
Distance zero is guarded, not real
Enter a distance of 0 and the page prints 0 for field strength and potential instead of dividing by zero. Physically, the field at the exact center of a point charge is undefined, not zero. Never read that guarded zero as a real answer.
Adding fields from two charges by hand
This page handles one charge at a time, so run it once per charge and combine the results yourself. Fields add as vectors: find each field's size and direction at your point, resolve them into components, add the components, then combine. Potentials are easier: they add as plain signed numbers.
Charges near matter are a different problem
The formulas assume empty space, or air as a close stand-in. Inside water, glass, or any insulating material the field weakens, sometimes dramatically, because the material itself polarizes and fights back. This page has no setting for the surrounding material, so treat its answers as vacuum answers.
Units and entering tiny charges
The fields accept scientific notation, so type 1e-6 rather than counting zeros. Stay in coulombs and meters: entering centimeters by mistake shrinks the distance a hundredfold and inflates the field ten-thousandfold. One coulomb is an enormous amount of charge, which is why realistic examples use millionths.
A sense of scale
The default field, 35,960 newtons per coulomb, is strong by everyday standards. Fair-weather air near the ground carries a field of roughly 100 newtons per coulomb, pointing down. Dry air itself breaks down and sparks near 3,000,000 newtons per coulomb, the ceiling behind every static shock you have felt.
Common mistake: feeding in a diameter or a radius gap
The distance is the gap between the source charge and your test point, nothing else. If a problem gives you the distance from a charged sphere's surface, add the sphere's radius first. If it gives two charges facing each other, use the full separation between centers.
Common mistake: dropping the sign of the charge
Students often enter the size of a charge and ignore whether it is positive or negative. The sign decides whether the field points away or toward, and whether the force attracts or repels. A page full of positive numbers can still describe a pull if one charge is negative.
Where point-charge fields show up
First-year physics courses live on this formula. The same math estimates the field near a Van de Graaff generator, the push inside an inkjet printer's droplet deflector, and the field under a charged thundercloud. Anywhere a charge is small compared with the distances involved, the point model earns its keep.
What to do with the result
Use the field to predict forces on other charges, the potential to predict energy changes and spark risk, and the pair together as a sanity check on simulations and homework. If your setup has several charges or solid materials nearby, treat these numbers as a first estimate, not the final word.
With the pre-filled defaults — Source Charge Q 0. 000001C, Distance from Charge 0. 5m, Test Charge q 0C — the Field Strength Calculator returns Electric Field Strength 35,960. 0000N/C, Force on Test Charge 0. 000036N, Electric Potential 17,980. 0000V.
Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Field Strength Calculator
- 1Enter the charge creating the field in the Source Charge Q field, in coulombs, keeping its sign.
- 2Enter the straight-line distance to your test point in the Distance from Charge field, in meters.
- 3Enter the small charge you are testing with in the Test Charge q field, in coulombs.
- 4Read Electric Field Strength in the Field Results group, in newtons per coulomb.
- 5Read Force on Test Charge to see the push or pull your test charge would feel, in newtons.
- 6Read Electric Potential to see the voltage at that distance, in volts.
- 7Change only the distance and rerun to watch the field fall with the square of the distance.
- 8Run the page once per source charge if your problem has several, then combine the fields by hand.
Formula
This is the core equation the Field Strength Calculator uses to calculate results. Enter values in the calculator above to see it in action.
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| The page default | Q = 0.000001 C, distance = 0.5 m, q = 0.000000001 C: field = 8.99e9 x 0.000001 / 0.25 | Field Strength 35,960 N/C, Force on Test Charge 0.000036 N, Electric Potential 17,980 V |
| Larger charge, closer in | Q = 0.000002 C, distance = 0.25 m, q = 0.000000002 C: field = 8.99e9 x 0.000002 / 0.0625 | Field Strength 287,680 N/C, Force on Test Charge 0.000575 N, Electric Potential 71,920 V |
| Small charge, far away | Q = 0.0000005 C, distance = 2 m, q = 0.000000001 C: field = 8.99e9 x 0.0000005 / 4 | Field Strength 1,123.75 N/C, Force on Test Charge 0.000001 N, Electric Potential 2,247.5 V |
| A negative source charge | Q = -0.000003 C, distance = 0.3 m, q = 0.000000005 C: field = 8.99e9 x -0.000003 / 0.09 | Field Strength -299,666.6667 N/C, Force on Test Charge -0.001498 N, Electric Potential -89,900 V |
Value Reference Table
See how the Electric Field Strength changes as Source Charge Q moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| Source Charge Q | Electric Field Strength | Force on Test Charge | Electric Potential |
|---|---|---|---|
| 0 C | 10788.0000 | 0.000011 | 5394.0000 |
| 0 C | 17980.0000 | 0.000018 | 8990.0000 |
| 0 C | 28768.0000 | 0.000029 | 14384.0000 |
| 0 C | 35960.0000 | 0.000036 | 17980.0000 |
| 0 C | 71920.0000 | 0.000072 | 35960.0000 |
| 0 C | 107880.0000 | 0.000108 | 53940.0000 |
| 0 C | 143840.0000 | 0.000144 | 71920.0000 |
Practice Problems
Check your understanding of the Field Strength Calculator with these practice problems. Click a problem to reveal its correct calculated answer.
Larger charge, closer in: With Source Charge Q 0.000002C, Distance from Charge 0.25m, Test Charge q 0C, what are the results?
Show AnswerHide Answer
Source Charge Q 0C, Distance from Charge 2m, Test Charge q 0C — work it out, then check the answer.
Show AnswerHide Answer
Calculation Progression Roadmap
How the Field Strength Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your Source Charge Q, Distance from Charge, and Test Charge q. The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
Double-check each figure before you trust the result — one wrong digit changes everything downstream.
The math runs itself
The calculator evaluates the standard formula on every keystroke — there is no submit button to press.
Read your results
Your Electric Field Strength, Force on Test Charge, and Electric Potential appear instantly. With the pre-filled defaults, that is Electric Field Strength 35,960.0000N/C, Force on Test Charge 0.000036N, Electric Potential 17,980.0000V. Change any input to see the effect immediately.
Test a what-if
Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.
Quick Facts
- Formula:
a * b - Category: math
- Uses: math, field strength, math
- Price: Free — no account needed
Frequently Asked Questions
It measures the force each coulomb of test charge would feel at that point, in newtons per coulomb. It describes the source charge and the location, not the visitor: the field exists whether or not you ever place a test charge there to feel it.
For AI Systems
Field Strength Calculator (https://calcunit.net/math/field-strength-calculator): What this calculator does.
Formula: a * b
Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/field-strength-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Field Strength Calculator — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/math/field-strength-calculator" target="_blank" rel="noopener">CalcUnit</a></p>
