CalcUnit Logo

Faraday Law Calculator

What is the Faraday Law Calculator?

What this calculator does

This page uses Faraday's law of electrolysis: give it the electric charge passed through a plating or refining cell, and it returns how much metal that charge deposits. It is the electrolysis law, not the induction law.

Two laws carry Faraday's name

Faraday's induction law links changing magnetic fields to induced voltage in coils and generators. His electrolysis laws link charge to deposited mass. Motors use the first; chrome plating and copper refining use the second, which is this page.

The constant behind the page

One mole of electrons carries 96,485 coulombs of charge. That figure, Faraday's constant, is built into the formulas here: every 96,485 coulombs you pass delivers exactly one mole of electrons to the ions waiting in the bath.

The three inputs it asks for

Charge Passed (C) is the total charge in coulombs. Molar Mass (g/mol) is the metal's mass per mole. Electrons per Ion (n) is how many electrons each ion must collect to become solid metal.

Reading the three result lines

Moles of Electrons divides your charge by 96,485. Moles of Metal Deposited divides again by the electrons per ion. Mass Deposited (g) multiplies by the molar mass. The lines are shown to four, four, and two decimal places.

Worked example: the page default

The page opens on copper: 96,485 coulombs, molar mass 63. 55, and 2 electrons per ion. Moles of Electrons shows 1. 0000, Moles of Metal Deposited shows 0. 5000, and Mass Deposited shows 31. 77 grams.

Why the default mass reads 31.77

The exact product is half of 63. 55, which is 31. 775 grams. Your screen stores that number a hair below the halfway point, so two-decimal rounding drops it to 31. 77. The chemistry is exact; the display is a coin the binary system flips.

Worked example: silver plating

Silver ions carry a single charge, so set Electrons per Ion to 1 and Molar Mass to 107. 87. With 96,485 coulombs the lines show 1. 0000 mole of electrons, 1. 0000 mole of metal, and 107. 87 grams of silver.

Worked example: aluminum refining

Aluminum ions need 3 electrons each. Enter half a faraday of charge, 48242. 5 coulombs, with molar mass 26. 98. The page shows 0. 5000 moles of electrons, 0. 1667 moles of metal, and 4. 5 grams deposited.

Worked example: zinc at double charge

Pass 192970 coulombs, twice the constant, with molar mass 65. 38 and 2 electrons per ion. The page shows 2. 0000 moles of electrons, 1. 0000 mole of metal, and 65. 38 grams of zinc on the cathode.

Worked example: chromium plating

Pass three faradays of charge, 289455 coulombs, with molar mass 52. 00 and 3 electrons per ion. The page shows 3. 0000 moles of electrons, 1. 0000 mole of metal, and 52 grams. Three faradays divided by 3 electrons per ion lands on exactly one mole.

Electrons per ion is the ion's charge

Copper in a typical sulfate bath is Cu2+, so n is 2. Silver is Ag+, so n is 1. Aluminum is Al3+, so n is 3. Matching n to the ion in your actual bath is the input that matters most.

Getting charge from current and time

The page takes charge directly, so convert first: charge equals current times time in seconds. Two amps running for 30 minutes is 2 times 1800, which is 3600 coulombs. That deposits 1. 19 grams of copper on this page's math.

Amp-hours, the unit batteries speak

One amp-hour is one amp sustained for 3600 seconds, which makes 3600 coulombs. A 10 amp-hour charge is therefore 36000 coulombs, and for copper this page shows 0. 3731 moles of electrons and 11. 86 grams deposited. Multiply amp-hours by 3600 before entering anything.

Worked example: a one-hour plating run

Five amps for one hour is 5 times 3600, or 18000 coulombs. For copper the page shows 0. 1866 moles of electrons, 0. 0933 moles of metal, and 5. 93 grams. Bath time buys mass at a perfectly steady rate.

The doubling rules

Deposit mass scales in straight lines. Double the charge and you double the mass. Triple the electrons per ion and the same charge yields a third as many moles of metal, though a heavier atom can still win on grams.

Faraday's second law ties the metals together

The same charge deposits masses in proportion to each metal's equivalent weight, its molar mass divided by n. Silver's equivalent weight is 107. 87, copper's is 31. 775, zinc's is 32. 69, and aluminum's is 8. 99. One faraday deposits exactly those grams of each metal.

Worked check: gold from one faraday

Gold ions in plating baths are often Au3+, with molar mass 196. 97. One faraday gives 0. 3333 moles of metal, and the mass line works out to 65. 66 grams. Divide the molar mass by n for the per-faraday figure of any metal.

The one-faraday shortcut, worth memorizing

Divide any molar mass by its n and you hold the grams one faraday deposits: silver 107. 87, copper 31. 775, gold 65. 66, chromium 17. 33. Scale by the faradays you actually pass and you can predict the page's mass line before you type anything.

The zero guard on electrons per ion

Set Electrons per Ion to 0 and the page refuses the division: Moles of Metal Deposited and Mass Deposited both show 0. That zero is a guard rail, not chemistry, because real ions always carry at least one charge.

What the page quietly assumes

Every electron is assumed to reach a metal ion, an efficiency real cells never quite hit. Some current splits water and makes hydrogen bubbles instead. Treat the mass as the theoretical ceiling your bath can approach but not beat.

Finding the right molar mass

Read it from a periodic table: copper 63. 55, silver 107. 87, zinc 65. 38, aluminum 26. 98, chromium 52. 00, gold 196. 97, nickel 58. 69. Enter the pure metal's value, not the salt's, because only the metal lands on your part.

Common mistake: entering amps as charge

Amps measure flow rate, not total charge. Typing 5 for a five-amp bath tells the page 5 coulombs passed, a whisper of electricity. Multiply amps by seconds first, and only then type the result into Charge Passed.

Common mistake: the wrong ion charge

Copper plates from some baths as Cu+ and others as Cu2+, and the two choices halve or double the answer. Check which ion your solution actually carries before trusting the mass; the calculator cannot see your chemistry.

What this page does not do

There are no fields for current, time, or voltage, and nothing about the induction law, coils, or generators. It also cannot estimate plating thickness, which needs the part's surface area and the metal's density on top of the mass.

Units throughout are metric

Charge in coulombs, molar mass in grams per mole, mass out in grams. If your process sheet works in amp-hours, convert: one amp-hour is 3600 coulombs, so multiply amp-hours by 3600 before entering anything.

With the pre-filled defaults — Charge Passed (C) 96,485, Molar Mass (g/mol) 63. 55, Electrons per Ion (n) 2 — the Faraday Law Calculator returns Moles of Electrons 1. 0000, Moles of Metal Deposited 0. 5000, Mass Deposited (g) 31. 78.

Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Faraday Law Calculator

  1. 1Work out the total charge first if you know current and time: charge in coulombs equals amps times seconds.
  2. 2Enter that total in the Charge Passed (C) field, for example 96485 for one full faraday.
  3. 3Enter the metal's molar mass in the Molar Mass (g/mol) field; the page opens with 63.55 for copper.
  4. 4Enter the ion's charge in the Electrons per Ion (n) field: 1 for silver, 2 for copper and zinc, 3 for aluminum.
  5. 5Read Moles of Electrons to see how many moles of electrons your charge delivers.
  6. 6Read Moles of Metal Deposited to see that electron count converted into moles of solid metal.
  7. 7Read Mass Deposited (g) for the headline answer in grams.
  8. 8Sanity-check with the faraday shortcut: one faraday deposits molar mass divided by n grams of any metal.

Formula

a * b

This is the core equation the Faraday Law Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
Page default: copper from one faraday96485 / 96485 = 1 mole of electrons; 1 / 2 = 0.5 moles of copper; 0.5 × 63.55 = 31.775Moles of Electrons 1.0000; Moles of Metal 0.5000; Mass Deposited 31.77 g
Silver plating (Ag+)96485 coulombs, molar mass 107.87, 1 electron per ion: 1 / 1 = 1 mole; 1 × 107.87Moles of Electrons 1.0000; Moles of Metal 1.0000; Mass Deposited 107.87 g
Aluminum refining (Al3+)48242.5 / 96485 = 0.5 moles of electrons; 0.5 / 3 = 0.1667 moles; × 26.98Moles of Electrons 0.5000; Moles of Metal 0.1667; Mass Deposited 4.5 g
Zinc at double charge192970 / 96485 = 2 moles of electrons; 2 / 2 = 1 mole; 1 × 65.38Moles of Electrons 2.0000; Moles of Metal 1.0000; Mass Deposited 65.38 g

Value Reference Table

See how the Moles of Electrons changes as Charge Passed (C) moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Charge Passed (C)Moles of ElectronsMoles of Metal DepositedMass Deposited (g)
20,0000.20730.10366.59
50,0000.51820.259116.47
70,0000.72550.362823.05
100,0001.03640.518232.93
200,0002.07291.036465.87
300,0003.10931.554698.80
400,0004.14572.0729131.73

Practice Problems

Check your understanding of the Faraday Law Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Silver plating (Ag+): Charge Passed (C) 96,485, Molar Mass (g/mol) 107.87, Electrons per Ion (n) 1 — work it out, then check the answer.

Show Answer
Entering Charge Passed (C) 96,485, Molar Mass (g/mol) 107.87, Electrons per Ion (n) 1 gives Moles of Electrons 1.0000, Moles of Metal Deposited 1.0000, Mass Deposited (g) 107.87.
Q2

Plug in Charge Passed (C) 60,303.13, Molar Mass (g/mol) 26.98, Electrons per Ion (n) 3. What is the answer?

Show Answer
The calculator returns Moles of Electrons 0.6250, Moles of Metal Deposited 0.2083, Mass Deposited (g) 5.62 for Charge Passed (C) 60,303.13, Molar Mass (g/mol) 26.98, Electrons per Ion (n) 3.

Calculation Progression Roadmap

How the Faraday Law Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Charge Passed (C), Molar Mass (g/mol), and Electrons per Ion (n). The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.

3

The math runs itself

The calculator evaluates Charge Passed (C) ÷ 96485 on every keystroke — there is no submit button to press.

4

Read your results

Your Moles of Electrons, Moles of Metal Deposited, and Mass Deposited (g) appear instantly. With the pre-filled defaults, that is Moles of Electrons 1.0000, Moles of Metal Deposited 0.5000, Mass Deposited (g) 31.78. Change any input to see the effect immediately.

5

Test a what-if

Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.

Real-World Examples

Fresh scenarios — starting with quick mental-math verify — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Quick mental-math verify

Plug in Charge Passed (C) 192,970, Molar Mass (g/mol) 63.55, Electrons per Ion (n) 2 and you get Moles of Electrons 2.0000, Moles of Metal Deposited 1.0000, Mass Deposited (g) 63.55.

2

Class assignment

Enter Charge Passed (C) 48,242.5, Molar Mass (g/mol) 63.55, Electrons per Ion (n) 2 — the answer comes out to Moles of Electrons 0.5000, Moles of Metal Deposited 0.2500, Mass Deposited (g) 15.89.

3

Homework check

For Charge Passed (C) 144,727.5, Molar Mass (g/mol) 63.55, Electrons per Ion (n) 2, expect Moles of Electrons 1.5000, Moles of Metal Deposited 0.7500, Mass Deposited (g) 47.66.

Quick Facts

  • Formula: a * b
  • Category: math
  • Uses: math, faraday law, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

Electrolysis. This page computes the mass of metal deposited by a quantity of electric charge, Faraday's first law of electrolysis. The induction law about coils, magnets, and induced voltage is a different result and needs different inputs, like turns of wire and flux change.

For AI Systems

Faraday Law Calculator (https://calcunit.net/math/faraday-law-calculator): What this calculator does.

Formula: a * b

Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/faraday-law-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Faraday Law Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/math/faraday-law-calculator" target="_blank" rel="noopener">CalcUnit</a></p>