CalcUnit Logo

Area Of Sector Calculator

What is the Area Of Sector Calculator?

What this calculator does

Enter a Radius and a Central Angle in degrees, and this calculator returns the Area of a circular sector: the pie-slice region cut out of a circle by two radii and the arc between them. One formula, two inputs, and a single area in square units.

What a sector is

A sector is bounded by two straight radii and the curved arc they enclose, exactly the shape of a pizza slice or a pie-chart wedge. A sector with an angle under 180 degrees is called minor; one over 180 degrees, where the slice is most of the pie, is the major sector.

The formula, two ways

A sector is a fraction of the full circle: the angle divided by 360, times pi times the radius squared. Simplify that and you get the form this page uses, half of the radius squared times the angle measured in radians. Same answer, two routes; the fraction version is the easier mental check.

The angle must be in degrees

The input is labeled Central Angle (degrees), and the formula converts your degrees into radians internally before computing. Whatever you type is treated as degrees, full stop. If your problem states the angle in radians, convert before entering, or compute half of r squared times the angle by hand.

The radians trap, in numbers

Take a radius of 10 and an angle of 1 radian. The true sector area is half of 100 times 1, which is 50. Type 1 into this page and it reads the angle as 1 degree, returning 0. 8727 instead. Radians are about 57 times the count of degrees, so the error is enormous.

Reading the Area result

The Outputs group shows a single Area field, to four decimal places, in square units of the radius unit: a radius in inches yields square inches. Because the radius is squared inside the formula, its unit matters twice over, and a slip in it moves the answer more than a slip in the angle.

Worked example: the page default

The calculator opens with Radius 5 and Central Angle 60 degrees, giving an Area of 13. 09. Sixty degrees is one sixth of a full turn, and the full circle at radius 5 is 78. 5398, so one sixth of it is 13. 09. The fraction check and the formula agree.

Worked example: a quarter circle

Enter Radius 10 and Central Angle 90 degrees and the Area is 78. 5398. That is exactly a quarter of the full circle at radius 10, whose area is pi times 100. Quarter circles are the friendliest check on this page: the sector should be precisely one fourth of pi r squared.

Worked example: one pizza slice

A pizza cut into eight equal slices has a central angle of 45 degrees per slice. Enter Radius 7 and Central Angle 45 degrees and one slice has an Area of 19. 2423. Eight such slices would total the full pie, an area of about 153. 938.

Worked example: a third of a circle

Enter Radius 12 and Central Angle 120 degrees and the Area is 150. 7964. At 120 degrees the sector is one third of the circle, and the full circle at radius 12 is pi times 144, about 452. 3893, so a third of it matches the result this page returns.

A built-in check: the full circle

Set the angle to 360 degrees and the calculator must return the whole circle, pi times the radius squared. At Radius 5 that is 78. 5398, the same number the quarter-circle example used at radius 10 scaled down. If 360 degrees does not reproduce the full circle, an input was mistyped.

Major sectors work too

Angles between 180 and 360 degrees describe the larger leftover slice rather than the smaller wedge, and the formula prices them the same way. An angle of 270 degrees is three quarters of the circle. Past 360 the formula keeps growing, but a single physical slice cannot exceed the whole pie.

What is not shown: arc length

This page returns area only, not the curved edge length. By hand, arc length is the radius times the angle in radians. A radius of 10 at 90 degrees, which is pi over 2 radians, has an arc of 15. 708. Garden edging and trim follow the arc, so the number is wanted alongside.

Finding a segment by hand

A segment is the sector minus its triangle, the sliver between the arc and the chord. For radius 10 at 90 degrees, the triangle from the two radii has an area of 50, so the segment is 78. 5398 minus 50, which is 28. 5398. This page stops at the sector; the subtraction is yours.

Where sectors show up

Part-circle sprinkler coverage is planned in sectors, since a head sweeping 90 degrees waters a quarter circle. Pie charts are sectors whose angles are data in disguise. Pizza slices, fan sweeps, circular garden beds against a wall, and the throw of a rotating beacon all ask this same question.

Sectors and pie-chart percentages

The angle is the percentage in disguise: divide the angle by 360 to get the share of the circle. Sixty degrees is 16. 6667 percent of the pie. Running it backward, a chart category worth 25 percent of the total owns a central angle of 90 degrees exactly.

Sectors in sprinkler planning

A sprinkler head with a 20 foot throw, set to sweep a half circle along a fence line, waters a sector with radius 20 and angle 180 degrees. That is half of pi times 400, about 628. 3185 square feet. Quarter-turn heads cover half of that, which is why throw and sweep are quoted together.

Thirty-six degrees is a tenth of the pie

A mental ruler: 36 degrees is one tenth of a full turn, so each 36 degree step adds or removes a tenth of the circle's area. Seventy-two degrees is a fifth, 120 degrees a third, and 180 degrees a half. These landmarks catch most typing errors before they cost anything.

The radius does the heavy lifting

Because the radius is squared, doubling it quadruples the sector area at the same angle, while doubling the angle only doubles the area. A sprinkler with twice the throw covers four times the lawn, not two times. When an answer surprises you, suspect the radius entry first.

The common mistake: entering the diameter

The field wants the radius, half the diameter. Type the diameter of a 14 inch pizza, 14, instead of its radius, 7, and the area comes out four times too large, because the wrong value gets squared. Halve any diameter before it goes near this page.

Zero and full angles

An angle of 0 collapses the slice to a line and returns an Area of 0, and a radius of 0 does the same from the other direction. An angle of exactly 360 returns the full circle. Negative angles return negative areas, which no real slice has, so read them as typos.

With the pre-filled defaults — Radius 5, Central Angle (degrees) 60 — the Area Of Sector Calculator returns Area 13. 0900. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Area Of Sector Calculator

  1. 1Enter the Radius: the distance from the center of the circle to its edge. If you measured the diameter, halve it first.
  2. 2Enter the Central Angle in the Central Angle (degrees) field, in degrees; the page opens with 60.
  3. 3Read the Area in the Outputs group, shown to four decimal places in square units.
  4. 4Check the fraction: the answer should be the angle divided by 360, times pi times the radius squared.
  5. 5Test the page with an angle of 360: the result must equal the full circle area for your radius.
  6. 6If your angle is in radians, multiply it by 180 divided by pi to convert it to degrees before entering.
  7. 7For the larger leftover slice, enter the major angle, anything from 180 up to 360 degrees.
  8. 8For arc length, which this page does not show, multiply the Radius by the angle in radians by hand.

Formula

0.5 * r^2 * (angle * PI / 180)

This is the core equation the Area Of Sector Calculator uses to calculate results. Enter values in the calculator above to see it in action.

See the full step-by-step formula guide with worked examples →

Common Examples

ScenarioCalculationResult
Page default: one sixth of a circleRadius 5, Central Angle 60 degrees: 0.5 x 25 x (60 x pi / 180)Area 13.09
Quarter circleRadius 10, Central Angle 90 degreesArea 78.5398
One of eight pizza slicesRadius 7, Central Angle 45 degreesArea 19.2423
A third of a circleRadius 12, Central Angle 120 degreesArea 150.7964

Value Reference Table

See how the Area changes as Radius moves across its typical range — every row below is calculated live with the same formula as the calculator above.

RadiusArea
10.5236
34.7124
48.3776
513.0900
618.8496
833.5103
1052.3599
20209.4395

Practice Problems

Check your understanding of the Area Of Sector Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Example calculation: Given Radius 5, Central Angle (degrees) 60, what does it come out to?

Show Answer
The calculator returns Area 13.0900 for Radius 5, Central Angle (degrees) 60.

Calculation Progression Roadmap

How the Area Of Sector Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Radius and Central Angle (degrees). The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

Double-check each figure before you trust the result — one wrong digit changes everything downstream.

3

The math runs itself

The calculator evaluates 0.5 × Radius^2 × (Central Angle (degrees) × π ÷ 180) on every keystroke — there is no submit button to press.

4

Read your results

Your Area appears instantly. With the pre-filled defaults, that is Area 13.0900. Change any input to see the effect immediately.

5

Test a what-if

Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.

Real-World Examples

Fresh scenarios — starting with homework check — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Homework check

For Radius 10, Central Angle (degrees) 60, expect Area 52.3599.

2

Double-checking a spreadsheet

A quick run with Radius 2.5, Central Angle (degrees) 60 gives Area 3.2725.

3

Settling a debate

With Radius 7.5, Central Angle (degrees) 60, the calculator returns Area 29.4524.

Quick Facts

  • Formula: 0.5 * r^2 * (angle * PI / 180)
  • Category: math
  • Uses: math, area of sector, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

Degrees, always, on this page. The Central Angle field is labeled in degrees and the formula converts to radians internally. If your angle is in radians, convert it first by multiplying by 180 divided by pi, or compute half of r squared times the angle by hand.

For AI Systems

Area Of Sector Calculator (https://calcunit.net/math/area-of-sector-calculator): What this calculator does.

Formula: 0.5 * r^2 * (angle * PI / 180)

Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/area-of-sector-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Area Of Sector Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/math/area-of-sector-calculator" target="_blank" rel="noopener">CalcUnit</a></p>